Quote:Originally Posted by MaFi0s0 Make sure your RAM are in the correct DIMM slots.
Reboot with stock everything, 1333 ram and run windows update.
Dont run overclock settings until windows has configured the update.
Quote:Originally Posted by bgineng Have you disabled paging to your hard drive by any chance?
Originally I had page file off.
Then Prime95 in a middle of a custom blend (one of the few times it would run at 14,000mb without "Error...
Quote:Originally Posted by MaFi0s0 Go into Digi+ and change:
DRAM Power Phase Control Optimized to Extreme.
DRAM Power Thermal Control from 110 to 120 or higher.
I changed DRAM Power Phase Control to Extreme (was on auto)
And I put...
Quote:Originally Posted by Anth0789
Here it is the new manual:
Just got my TT II today. The included manual (outdated) says that the black spacers are 2.3mm. But in that manual you posted, it...
I just want to make it clear, I don't have any pull fans on the H100.
Only 2 fans are installed for pushing purposes. Both are under the rad, which is attached under the top bezel as you would call it.
Of course, if I were to get 2...
"Only 7mm for an h100?
Okay, put the top set of fans in the top bezel of the case, attach h100 directly to the case (inside), add bottom fans to the exposed underside of h100"
You can't mount the fans underneath the h100 rad with a...