Posts by christpunchers

Heh, sorry to go on and on but to reiterate, but sanding down the plastic casing of the 8pin cable was not the hard part. The hard part is pulling the pins/wires out of the connector. You have use tiny screwdrivers and staples to do it...

I'm a P8Z77 WS. Its 8pin CPU connector is in the exact same position as what's on your Sabertooth. I had a lot of trouble installing the H100. With an 8pin CPU cable plugged into the mobo, there was no way for me to mount the H100 with...

As per the IB overclocking guide, the minimum recommended PLL is 1.5V. Default is 1.8V. Try something like 1.6V and see if you're stable with that and if it lowers your temp.

For those who have installed the TT... does the weight of the cooler cause the card to bend or sag? I remember back when I had the AC Accelero AXP installed on a GTX 285 a few years ago... it was pretty darn heavy.

Quote:Originally Posted by rossb I've just installed it, so I will take a pic of it inside the case later today. I checked the heatsinks after 5 hours and they still seemed a little loose. One of them fell off when I held the pcb...

Got a twin turbo coming my way. Will install it onto a 680 once I get my Ivy OC all stable. Looking forward to installing this baby.

Quote:Originally Posted by Gauntlet3h Here is my official stable 3770K HT @ 4500 and Vcore @ 1.232 V. Running at 12 hours 30 P95 custom blend 85% memory. I told you guys it was stable. My goal was to have max temp under 80. In...

After having the Cosmos 2 delivered since Feb. I finally got around to building my rig a few days ago. Overall the Cosmos 2 looks very sleek. However, I still can't get over how much plastic is found in this thing. I would have...

Got my Z77 WS running yesterday. Everything looks okay so far. However, I'm not too impressed with the packaging this board came in. Not sure if that's how Asus operates these days but the box didn't have a seal. There was no seal or...

Running my 3770k @ 4.5 with 1.235 vcore, ultra high (75%) LLC currently (P8Z77 WS). Cpu-Z reads 1.240v on idle and about 1.232v on full load. Is that too high? I'm about 15 hours into Prime95 default blend (latest version) right now. No...