Posts by Skrumzy

I have successfully OC'ed to 4.8 via multiplier but it seems either the chip or my board does not like 49. I have gone as far as 1.550 on volts and amazingly my delid project and my raystorm are able to hold temps at 75 or less. With...

Another question that I have is that is Intels recommended max what it loads at or what is set at in BIOs. The lowest setting for Vdroop control still takes 12% away from my bios value.

I have successfully OC'ed to 4.8 via multiplier but it seems either the chip or my board does not like 49. I have gone as far as 1.550 on volts and amazingly my delid project and my raystorm are able to hold temps at 75 or less. With...

Updated!

I don't think I have before temp pics =(. I can look though. I have before and after delidding pics though =). I'm trying to bump my oc right now though. I will add pictures of some sort soon though I PROMISE!

So I finally got all my materials in and delidded my Ivy Bridge. I opted to retain the IHS because I didn't want to rig the processor to stay in place with electrical tape. Materials Used: Razor Blade Liquid Pro Ultra(Processor to...

You guys are right doing a straight run with rj45 will ALWAYS be the best option. What you fail to realize is that some people live in apartments, condos, or are renting houses. Land lords don't really like you drilling and/or tearing...

If its one story give powerline networking a try...no?

Quote:Originally Posted by yuhaowu A RX 360 + EX/RX 240 would be the right choice. That would be a little rough. At most I could do 240 + 240, but that would mean I would have to pop the rivets at the bottom of the case and remove...

I think in a couple months I will be WC my gpus and was curious if an XSPC EX240 at the top and an EX120 at the bottom of my case would provide enough area to cool both an i5 3570k and sli'd 670s. Thanks in advance! Forgot to add, I...