Posts by jimbearsfan1

Hey.....good to hear from you.... I'm still using my Elite x2 / Boreas setup...works pretty good since I went with the Alphacool res that allows placement of 4 DDC pumps on the res itself...getting great flow and pressure...but I still...

Hey out there....anyone still hitting this forum? Would love to chat with fellow Coolit fans.....

So...I have a question. While my system is apart and I'm waiting for my Classified to return, I got to thinking about air flow and the fans in my mtec case. This case is a modified Silverstone TJ-07, which stock would have two 120mm...

I replaced everything from the Boreas unit up. Tubing, blocks, pumps, everything. The pump is the mpc355 w/restop, and the only thing the Boreas is cooling is the CPU. The other loop is the twin FZE units, also with a 355...

Thanks for the feedback! I worry about the airflow issue too...the two FZE are on the bottom of the case, and there are mesh vents on both sides that run the length of the bottom...so they should be able to pull air in from the back...

In point of fact all of the tubing, coils, fittings, etc. have all been re-worked and replaced. This is basically a completely new configuration for this computer. Hope you like it! More to come once I get it fired up and burned in....

Been a while...work has kept me on the road for months...but, I've finally gotten a chance to get to the leak testing stage on my build. To refresh, this started out as the stock Boreas MTEC TJ-07 case from Coolit. To that I have added...

Ok, so here is what I am going with: HARDWARE: EE975 X58 Classified Mushkin Ascent Redline DDR3 1600 Soundblaster X-Fi Titanium PCI-E 2 x G.Skill Falcon SSD 128GB RAID 0 3 x EVGA GTX 280 FTW Tri-SLI LG Blu-Ray Burner Western...

Also....with the discussion about combo pump/res setups you are using, has anyone taken a look at this, and if so, opinions? Perhaps use one per loop? http://www.performance-pcs.com/catal...ducts_id=21424 I'm using all Koolance...

All.. Thanks. Great info and opinions. I have learned much from your comments, and am going to incorporate as much as I can into the build now...while it's still in the build stages. I appreciate all your help, and will soon...