New Posts  All Forums:

Posts by Darth Oscar

TBH I have had mine up to 5.2 GHz. I have never hit 4.7 GHz with any success my chip won't boot it I can hit 4.6 (my current 24/7) and 4.8 GHz no problem at all.. CPUs can just be stubborn sometimes.
Change the memory to this http://www.newegg.com/Product/Product.aspx?Item=N82E16820231536 Much better timings.
Use whocrashed to find your bsod codes: http://www.resplendence.com/whocrashed Then the chart below to fix the issue. BSOD Codes 0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT) 0x101 = add more vcore 0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT 0x1E = add more vcore 0x3B = add more vcore 0xD1 = add QPI/VTT voltage 0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances” 0X109 = add DDR3 voltage 0x0A...
Nice idea
It's not bad for a low end board and since OCing is not your priority you should be fine with it. Also 32GB RAM is a ton, I can't think of many situations where you would use half of it and even less where you would use all of it.
7 passes
http://www.overclock.net/t/910467/the-ultimate-sandy-bridge-oc-guide-p67a-ud7-performance-review ^Is an awesome thread.
1. Do you currently own an SSD and are you planning on purchasing one in the near future? If so, which brands are you considering (Intel, OCZ, Crucial, Kingston, Patriot Memory, Samsung, or other)? No I don't and it is on my list. Either Corsair or Intel 2. What is the most important consideration you make when you purchase an SSD (price, performance, brand, other)? Speed 3. How often do you purchase a new PC (less than a 1 year, 1-2 years, 2-3 years, over 3...
Yup just change the video to GTX 670s = win sauce
New Posts  All Forums: