MGX1016

Yes, they are basically the same cards except one had more VRAM.

__________________

Giant

Wow, what kind of cooler do you have..? I'm experiencing temperatures of 86 degrees without overclocking..!
Did you mod the cooler of the 8800?

headcracker

id like to do this mod to get a few more mhz , i got lots of degrees to spare , max temps 62c under load, but every guide ive read might aswell be in chinese lol , dont understand a word , what is "use a simple pencil to increase the voltage " "or use a variable resistor to connect to the leg of the IC chip shown below for more precise tuning.
" and "You can pencil the resistor marked above carefully to increase GPU Memory Voltage, or for better precision, you can solder a 20K ohms Variable Resistor to the spot marked and hook the other leg to any grounded spot. Set VR at Maximum Resistance and tune down resistance to increase voltage. Original resistance of resistor is 538ohms, reducing resistance by 10ohms will increase voltage by 0.05v.

" , not a word ? what is pencil an soldering an how do you do it lol, if it explained exactly how to do it i could do it, cheers

Dman

Here is the volt mod guide for the 8800's on madshrimps.com. Its much better detailed imo then the vr one.


http://www.madshrimps.be/?action=get...194&howtoID=72

__________________
http://valid.x86-secret.com/show_oc.php?id=441642

first experience with the evga 680i
http://www.overclock.net/intel-mothe...ard-today.html

Fiber FTW! http://www.speedtest.net/result/297458322.png

Orb http://service.futuremark.com/compare?3dm06=8775476

headcracker

cheers for link , makes a little bit more sence , still not gettin it tho an looks complicated lol , an not got the tools , think will stick with what i have

[S]teel [R]eign

If anyone does do this, be sure to use a low wattage soldering iron, as the traces are easy to lift.

__________________

FOR SALE: FOXCONN MARS + BONNEVILLE HEATERCORE W/ SHROUD