Ross1308

Hello all i was wondering if there is a problem with my pc i am crap with voltages and stuff, well not that bad but anyway when i open up my Asus PC Probe it comes up with a warning it says "There Are some WARNINGS Nb Core Voltage" on the screen NB Core Voltage is at 1.49v and highlited red obviously somthing is wrong somewhere but what any help would be appreciated thanks Ross1308

AMOCO

reset your bios to factory setting,that might help

Ross1308

Hmmm but then that means re timming all my Memory is there another way

whe3ls

lower nb voltage in bois

__________________

Ross1308

Ok but what to, what should it be i have an Asus Striker Extreme

gonX

I believe that chipset runs at 1.35v stock.

__________________
THE Mouse FAQ | 32-bit Resolution Fix | Important Information
64-Bit Driver Signing Fix | The Infraction and Warning System
My Anime Progress | The HoN Discussion Thread

Please direct all tech related questions to a thread in the respectable forums, and not to my PM inbox. Thank you

Ross1308

mine is at 1.49v at the minute

sparkison

I run my NB at 1.5v (basically same board as you). Don't worry about PC Probe, it's a POS in my humble opinion
And it will set off alot of warning that you don't really need to worry about.
You can configure it to not warn you; I would just use ntune to monitor volts(don't install the OC utilities, just the monitor) it is very accurate as far as reading the volts on these boards, and then use CoreTemp to measure the temp of the cores.

EDIT: Do you have any aftermarket NB cooling? Just thought of that, if you are still using the stock cooler try and keep the volts ~1.42 or lower as the NB gets very hot!

__________________
Water Loop
Liang D5 Variable >Black Ice XtremeII >D-Tek FuZion >