Crybabii

i oc my e6850 to 3.6 ghz.. by 8x 450 and using a ratio of 1:1 for my rams.. it wont boot so i up the voltage by .2 v to keep the cl to 4 4 4 12 is it dangerous for my rams?? i am using geil 4 4 4 12

zalmancooled

2.4v is fine and recommended to run with those timings. Here is a link for all your specs related to that ram
http://www.hardware.info/productdb/b..._PC28500_2_GB/
According to this your voltage is fine.

__________________

celebro

you upped it bij .2 so you upped it from standart vdimm (1.8)? if so 2.0 may be a bit low, you should check the stabilty with memtest if you didn't do that yet.

download here http://www.memtest86.com/memtest86-3.4a.iso.zip

__________________
overcast - covered with cloud
overcharge - pay too much
overcome - to manage

It's not there! shame on you oxford student's dictionary of english!11shift11one

100% overclock e2160
e2160 superpi :17.410

Ali (typical marrocan name)steals a bike, Jan calls Ali a bikethief, Jan gets sued, discrimination is illegal in the Netherlands.