LuckyX2

Im currently planning to do the following mods

1) X-Fi capacitor and op-amp mod
http://www.overclock.net/sound-cards...will-void.html

2) Replace the R47 chokes on my Foxconn Mars with R70 chokes
http://www.xtremesystems.org/forums/...t=foxconn+mars

3) Add tantalum capacitors in parallel with the cpu capacitors on my Mars
http://forums.extremeoverclocking.com/t275892.html

3) Foxconn Mars Vdroop mod
http://img214.imageshack.us/my.php?image=droophc6.jpg

4)8800GTS 512 vmem and vcore mod
http://www.xtremesystems.org/forums/...d.php?t=168788


So..... I think ive got all the correct pieces that I need.

Op-amp:http://www.national.com/pf/LM/LM4562.html
(1kohm and 50kohm)Trimmers:http://www.rapidonline.com/productin...moduleno=65273
(330uf 2v) Tantalum capacitors:http://www.digikey.com/scripts/DkSea...=495-1591-1-ND
(2200uf 16v) Black Gate capacitor: http://www.partsconnexion.com/catalo...ctrolytic.html

But I have a few questions before I start.
1) Where can I find the R70 chokes? I cant seem to find them anywhere!
2) Is that the correct trimmer that I should be using for the Vdroop/Vmem/Vcore mods
3) Where are some good places to get supplies? I know digikey is good but I have trouble navigating their site. And is there anywhere that would carry all of these things so I could just get it from one place?
4) Anything I should know before starting?

Thanks for the help everyone! And hopefully this can help other people too

EDIT: This is a duplicate thread, the real one can be found here:
http://www.overclock.net/general-vol...lots-mods.html