xlastshotx

I was wonder if it would be possible to add on a small voltage display to a graphics card? Like this...

(sorry for the crude drawing)(and minus the power connector)



I know you can use a voltage tester to see, but if this was possible it would be quite handy imo, to be able to keep an eye on the voltages when in the case without having to take off the side panel, and break out the voltage tester.

Also if it is possible were could I order a tiny voltage display?

__________________
Q9550 C1 - 4,531Mhz > Image > Orb

procpuarie

you could take apart a voltage meter and mod it to your case?

__________________

JEK3

Here's your display: http://shop4.frys.com/product/498594...H:MAIN_RSLT_PG

__________________
Rig complete, and folding for 37726...

xlastshotx

hmm I could, but I kinda want something that once soldered would be almost apart of the card. (and if it was apart of the case, it would be a pain to swap cards.

Oh wow, that one is pretty cool... Kinda a do it yourself one?


I would really like to have a vmoded card with a Variable rheostat, with the voltage display. That would be awesome for OC'ing. Being able to adjust the voltage and see what you are getting at the same time.

__________________
Q9550 C1 - 4,531Mhz > Image > Orb

xlastshotx

Anyone else know of somewhere were I could order a small LED/LCD voltage readout?

__________________
Q9550 C1 - 4,531Mhz > Image > Orb

CL3P20

I made a voltage readout for my old 7900GT that I mod'd ..just a regular gauge type though..i mounted it an empty drive panel, in the front of my case.

*Now I just leave the DMM plugged in while I set GPUv and test for droop..once they are set, they only need to be checked every now and then... Most GPU's that are vmod'd will have a 'burn-in' where voltage drops a tad [like .03v] after running mod'd for a few months.

__________________

..:Q6600 Club:..

INTEL 45

e8400: 5.13ghz
e7400: 4.5ghz
Q6600: 4.44ghz
8800GS@1028mhz
My photo albums