Slappa

Alright guys,

RMA'd my reference HIS 4850 awhile back. Got a new card back, although it is slightly different. The PCB layout is very similar to the reference model, but slightly modified. It is the same PCB being used on the HIS IceQ 4 Models of the card.

Now I want to attempt a pencil mod, however since the layout is different the reference mods don't apply.

Someone else posted a similar thread: http://www.overclock.net/graphics-ca...q-4-turbo.html

Here is a pic of my card and the reference card (Mine/Reference):


As you can see, the resistors have been juggled around.

If anyone knows another resistor I can shade, help would be appreciated!

Slappa

Bump

mth91

You might not be able to do the volt mod on that card. You oughtta take a look at the xtremesystems forum. They might have more on the topic.

__________________

philbrown23

there is a 2nd pancil mod on techpower up that does apply to you card it's in the same article that pic you have is from thats the one you'll need to use, see pic below

Attached Thumbnails

 

__________________
http://valid.x86-secret.com/cache/banner/434759.png

[size="4"]TIGER DIRECT

Slappa

I looked at this one, and yet again, there is a resistor in that place on my card. It's all been juggled around.

gamervivek

2nd one worked fine on my card,you sure its the IceQ4 pcb?

__________________
there are only 10 kind of people in this world, those who understand ternary, those who don't, and then those who don't give a damn.

I see in Fight Club the strongest and smartest men who've ever lived. I see all this potential, and I see squandering...

So bye-bye, miss american pie,gamervivek has left the building.

Ati Tray Tools vs CCC

Slappa

Oh wait, okay I see what happened. I got confused with this voltmod. It tells me to shade in the one above the one that you guys just posted. So thanks guys! I will try the one posted above!