Patch

I've only done hard mods by soldering according to posted instructions with images.

But my 8800GT is nonreference and has a different controller than most.

1) Anyone have an idea where I should solder a VR for vGPU?

2) And what resistance I should measure to determine which VR to use?

3) And how to actually determine which VR to use from said measured resistance?









RT8802A PQV Data sheet. 2/3/4/5 phase PWM.

Since the chip has 10 pins on each side, how do you know which side corresponds to which on the data sheet? Aside from the lettering stamped on top, I don't see any distinguishing characteristics to tell you the orientation of the chip.

__________________
Stock speeds make hardware sad.

5.27 Ghz i7 920 C0 on LN2......5.31 Ghz i7 975 on DICE......6.36 Ghz E8600 on LN2
7.01 Ghz Pentium 4 631 on LN2......7.96 Ghz Celeron 352 on LN2......7.02 Ghz Celeron 360 on LN2

DesertRat

Who's our local Volt Modder? You should shoot him a PM.

edit:

CL3P20 is his name!

in fact, there might even be some useful info in here

__________________

Patch

I browsed his thread before and missed the whole PNY section.

You made me look again and there is info there!

Thanks DR.

Looks like I have to find out how to get rid of the OVP and try to OV the memory still......

__________________
Stock speeds make hardware sad.

5.27 Ghz i7 920 C0 on LN2......5.31 Ghz i7 975 on DICE......6.36 Ghz E8600 on LN2
7.01 Ghz Pentium 4 631 on LN2......7.96 Ghz Celeron 352 on LN2......7.02 Ghz Celeron 360 on LN2