tankbusta

i had asked this in my thread for the 6600 volt mod but i got no reply

when one is able to volt mod through the bios of the graqphics card why do users use the other method of physically voltmodding it ???

and where do they get their extra power from i know that in the bios method the xtra power is achived through the pcie slot but what happens in the other method


thanks

ENTERPRISE

Through bios voltmodding the bios adds new parameters for the amount of Volts it can have and will draw the extra power through the PCI-E slot. As for PCB volt modding im not sure with that actual card.

__________________

tankbusta

ohk but which one will produce better results ???

ThaWaxShop

the physical volt modding will provide better results. BIOS volt modding doesnt always work

tankbusta

ohk i didnt know that but is there any guide for both of the mods i wanna know the theory behind it and how does it work
if anybody has links to info about volt modding plzplz put em up here


thanks

ThaWaxShop

http://sg.vr-zone.com/?i=1636&s=1

Renegade5399

Also, please understand that with the 6xxx series, you have to do a hardware mod in order to up the Memory voltage. That cannot be done with a BIOS flash.

sccr64472

The only cards that offer decent voltage control are the x1800 and x1900 cards. Slight voltage changes can be done using modded BIOS flashes on other cards, but only offer very small voltage gains and only on the gpu core itself. With a more complex volt mod, you can up the voltage far higher and can also adjust other voltages on the card besides just the gpu core.

tankbusta

so i will ne an after market cooler then...hmmm...ok will do i have great soldering skills but i just need to know what all i need and how do i go about it

tankbusta

the image links are broken !!!