Mystikx

When it comes to harddrives, is there a possible way that it is under performing..

Or it is basically it will work, or it wont.

ENTERPRISE

Theres such thing as Underperforming yes. Mostly found Under RAID arrays if not Configured properly. When it comes to SATA HDD's they can Underperform if there SATA Chip drivers arnt properly installed. Same goes for IDE if the IDE controller doesnt get properly installed.

A general fix for this problem is keep your chipset driversup to date.

__________________

DuckieHo

You can try running HD Tach to get a benchmark of your hard drive performance. Then compare it against the HD Tach database and see if yours is close to the others.

__________________
WANTED: Socket M Core/Core 2 CPU, SUGO-02 Black, quality 802.11b/g PCI Card
To answer most of your questions: (1) a fridge cannot cool a PC (2) 64-bit OS for over 3.4GB (3) If a PCIe card fits, it will work (4) Resolution, not screen size (5) If you have a question, it is not news (6) Report, not respond to Spam (7) Single/Non-Modular Rail PSUs are NOT better than Multi-Rail/Modular

Mystikx

There Are Drivers For Harddrives ...

gre0481

Chipset drivers up to date. ie 965 chipset, nvidia 590, etc. Not Hard DRIVE DRIVERS

Mystikx

http://img224.imageshack.us/my.php?image=wootup3.jpg

Hows that?

{core2duo}werd

because there are jus generic drivers for storage so you can put any non RAID drive into a system and it should just work
EDIT oh was that link there before i thought you were asking about the driver thing. that's not bad but like the guy onder me said it's a little low for Sata 300 you should take the jumper off if it isn't off already

__________________

mawsoccer

I believe your readings from that benchmark program are only showing it at SATA 1.5, take off the jumper and it will be at SATA 3.0

Mystikx

JUMPER?

The only thing connected to it is, Sata and Power input.

Mystikx

O..
How do i remove the "block" , its so small..