|
![]() |
Overclock.net - Overclocking.net > Components > Hard Drives & Storage | |
Gigabyte I-ram 2nd GEN
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | ||||||||||||
|
unable 2 fold effectively
![]() |
i was wondering did gigabyte or anyone ever make a second generation of their I-RAM.
here is the first gen: http://www.newegg.com/Product/Produc...82E16815168001
__________________
(1) good value coolers: XIGMATEK HDT-S1283 or Black Knight |OCZ Vendetta 2. (2) 8 PIN power connector on MOBO = 2x 4 pin connectors in parallel to lower resistence/voltage drop. 1x 4 pin will work (3) x64 OS showing only 3.x GB enable memory remapping (4) Fridge cannot cool the heat output from a PC. (5) SLI/CF is not always better than a single card. (6) CTRL + F11 will start up the dell recovery console
|
||||||||||||
|
|
|
|
#2 (permalink) | ||||||||||||
|
Going Broke Overclocking
![]() |
I don't think so... never saw it on the market.
__________________
"Life is Learning, Learning is Sharing, Sharing is Life" "Overclocking is like a drug addiction, the difference is we go broke improving our brain cells instead of destroying them!" Where in the world to buy on-line Dual or Multi Partition and Why
Everyone, GET Folding, it is important no matter how much you contribute ![]() Phenom II should be called Ph II, not a P II because it isn't an old Intel ![]()
|
||||||||||||
|
|
|
|
#3 (permalink) | ||||||||||||
|
unable 2 fold effectively
![]() |
well you're right. they did make several revisions, but i don't see a 2nd gen for DDR2 and SATA 3.0 Gb/s
all their products are here: http://www.gigabyte.com.tw/Products/...e/Default.aspx if they would make it for ddr2 and sata 3.0GB/s then you could raid these together and make them super fast and quite large. each would be about 8gb and raid 0 would make 1x 16gb drive. darn..
__________________
(1) good value coolers: XIGMATEK HDT-S1283 or Black Knight |OCZ Vendetta 2. (2) 8 PIN power connector on MOBO = 2x 4 pin connectors in parallel to lower resistence/voltage drop. 1x 4 pin will work (3) x64 OS showing only 3.x GB enable memory remapping (4) Fridge cannot cool the heat output from a PC. (5) SLI/CF is not always better than a single card. (6) CTRL + F11 will start up the dell recovery console
|
||||||||||||
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|