|
|
|
 |
Overclock.net - Overclocking.net > Components > Hard Drives & Storage | |
* OFFICIAL * HD Database / Benchmark | RAID & non-RAID Drives
|
||
 |
|
|
LinkBack | Thread Tools |
11-18-05
|
#111 (permalink) | |||||||||||
|
AMD Overclocker
 
|
New Raid
This is with my Dfi nf4 ultra d mobo.
Cpu stock at 1.8 ghz and mem stock at 200 with 623-3 bios. Western Digital 80 gig sata 1 hdd x2 Sata port 1 and 2. 64 stripe.
__________________
Fold For Overclock. 2nd place is 1st loser. Refresh is Good.
|
|||||||||||
|
|
11-18-05
|
#112 (permalink) | |||||||||||
|
Retired Section Director
 |
@gcraw ... can you please rerun this and ensure that ATTO is set to Total Length 32Mb and Direct IO Neither .. this will then help the results be easily compared to all the others.
__________________Thanks 
|
|||||||||||
|
|
11-18-05
|
#113 (permalink) | |||||||||
|
4.0ghz
 
|
Ok, dont know if i did this right. Dony=t even know if my score is good.
Asus sli deluxe 74 WD raptor Cpu @ 2.90 Memory timing 2.5-5-3-3 @ 1:1 timing FSB-292 mhz
|
|||||||||
|
|
11-18-05
|
#114 (permalink) | |||||||||||
|
Retired Section Director
|
Ok .. need to add another Screen chot to your post using ATTO make sure it is set to Total Length 32Mb and Direct IO Neither
__________________
|
|||||||||||
|
|
|
11-18-05
|
#115 (permalink) |
|
plain lazy
|
I've run it again, for what its worth, now that I'm on NF4. Using the same drives as before, some results are a little better than NF3, some are a little worse.
One thing strange though, is how the Seagate seems to hit a wall at about 49MB/s on the ATTO test. The Hitachi goes up over 50MB/s, but the Seagate just stops  Going in order, left to right: Seagate (C) HDTach, Seagate ATTO, Hitachi (D) HDTach, Hitachi ATTO, CPUz CPU and Memory
__________________
Nikon D90 + D40x / 18-55mm DX / 18-105 DX VR / 55-200mm DX VR / 50mm AF f1.8 / 70-210mm AF f4-5.6 
|
|
|
|
11-22-05
|
#116 (permalink) | ||||||||||||||
|
Intel oc'er in training
 |
Here's the test results from my other rig...
Mobo: Asus A8V HDD: Samsung 250Gb 16Mb cache PATA Burst: 91.8MB/s Average Read: 59.7MB/s
__________________
Quote:
|
||||||||||||||
|
|
|
11-26-05
|
#117 (permalink) | ||||||||||||||
|
Intel Overclocker
|
Here are my score, all system is currently at stock speeds.. a Raid 0 setup is currently running.
__________________
Quote:
Next Up! Some Better Case Fans Custom W/C ~ Parts started to arrive 
|
||||||||||||||
|
|
|
12-18-05
|
#118 (permalink) | |||||||||||||
|
4.0ghz
 
|
2WD 250gig sata2's 16meg cache Raid0 NF4 sata controller 16k stripe/4k cluster
__________________
Stinger Slingers V5 insanity reigns It's better to reign in hell than serve in heaven. There is more to life than increasing its speed. - Mahatma Gandhi...guess he's not a member of Overclock.net Kickin avatar by "Crash".... 
|
|||||||||||||
|
|
|
12-21-05
|
#119 (permalink) | |||||||
|
*cough* Stock *cough*
|
My results
Here are the results from my setup:
Asus A8N-SLI Premium with Athlon X2 3800+, 4 Cheapie Western digital (WD1200JS) 120GB SATA2 hard drives in a stripe. Also, my Hitachi 7K250 160GB and 200GB drives in a RAID 1 mirror config. Are there any settings that would help smooth out results for RAID 0 benchtests on HDTACH?
|
|||||||
|
|
|
12-31-05
|
#120 (permalink) | ||||||||||||||
|
Original OCN Gangsta
 
|
Dunno if the Storage Director's still updating this, but here goes:
2 Seagate 7200.9 SATAII hard drives, 120GB each. Shot here: 
__________________
My CNC Mill Project Quote:
--Randy Pausch Current Best Benchmark
|
||||||||||||||
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
