Quote:
Originally Posted by Kryten
Ok, are you needing to boot from these drives?
I had this, gave me a bit of a fright one time, but it sorted itself out eventually
First things first. Turn off RAID and boot the PC. Go into the BIOS and see if the drives are visible.
If they're not visible, one of them has crapped itself adn you need an RMA, if they're visible, try setting RAID back again.
If, after that, it still doens't work, then I'm afraid your array has gotten corrupt and you need to start over  |
I was about to post about my RAID 0 getting corrupt, but decided to just quote you. This is exactly what happen. Ive been slowly upgrading my PC the last few weeks. I bought 2 OCZ Vertex SSD drives and put them in RAID 0 config. Everything was running top shape till i decided to use Windows 7 RC. Thats when all the problems started. My MBR would corrupt every time i would shut down the PC. So i broke the raid, rebuilt it and then re-installed Windows 7 again. So far everything was cool. I decided to go the Frys Electronics (California enthusiast chain) cause i was told the CM HAF 932 was on sale at 114$. So i went, sure enough...on SALE!!!! I purchased it, got home and started to migrate from my POS Antec P180. I recorded the ports that my RAID was connected to. Upon boot up of the new case install, the raid was corrupt. JUST....LIKE...THAT! Same everything, different case. Just goes to show how...flimsy these raid builds are (or at least mine is). Sorry for the long post...its Monday, im at work...and im bored.
RAID 0 Status: Failed
08-01-09
