|
|
|
 |
Overclock.net - Overclocking.net > Components > Hard Drives & Storage | |
Running RAID 0 with 2 hard drives, with another hard drive on the same cable?
|
||
 |
|
|
LinkBack | Thread Tools |
11-10-09
|
#1 (permalink) | ||||||||||||||
|
4.0 GHz
 
|
Running RAID 0 with 2 hard drives, with another hard drive on the same cable?
Hey guys, I was wondering if running a RAID (RAID 0) with 2 hard drives and than using a separate hard drive as storage (JBOD) using the same SATA Cable that is being used on the RAID Configuration, would this affect performance?
Thanks in advance 
__________________
4.0GHz CPU-Z Validation Socket 1156 (Core i3/i5/i7) Club & Discussion Quote:
Quote:
|
||||||||||||||
|
|
|
11-11-09
|
#2 (permalink) | |||||||||||
|
walking that fine line...
 
|
I'm confused by the question...maybe you can explain what you mean by "using the same SATA Cable"
|
|||||||||||
|
|
|
11-11-09
|
#3 (permalink) | |||||||||||||||
|
4.0 GHz
|
Quote:
 I was thinking of a Molex connector  LOL That doesn't even make sense, sorry guys forget my thread, I was thinking of a Molex connector the whole time (-_-")
__________________
4.0GHz CPU-Z Validation Socket 1156 (Core i3/i5/i7) Club & Discussion Quote:
Quote:
|
|||||||||||||||
|
|
|
|
11-11-09
|
#4 (permalink) | |||||||||||||
|
Case Modder
|
Molex as in power right? that shouldn't be a problem at all.
__________________
 The Better HAF Process Frosty: The Snow TowerThe HAF 932 Case Owners ClubGeorgia State OverclockersAIM - tKBaha
|
|||||||||||||
|
|
|
|
11-11-09
|
#5 (permalink) | |||||||||||||
|
4.0ghz
|
I'm still confused. Do you mean your power supply has a cable that has 2 sata connectors and molex connector? And you're wondering if using the molex will interfere or something with the other 2 drives that are using the sata connectors? One long cable with the 3 connectors on it.
__________________
 : : The Official Corsair H50 Hydro Series Club : : Quote:
Last edited by Diabolical999 : 11-11-09 at 02:31 AM |
|||||||||||||
|
|
|
|
11-11-09
|
#6 (permalink) | |||||||||||||
|
AMD Overclocker
 
|
i run my 2 spinpoints in raid 0 and an old wd all sata off the same power line so no no probs at all
|
|||||||||||||
|
|
|
|
11-11-09
|
#7 (permalink) | |||||||||||||
|
4.0ghz
|
^Right, there will be no problems at all then. Just don't setup the 3rd hdd as part of your RAID 0 array, so it's independent from the array.
__________________
: : The Official Corsair H50 Hydro Series Club : : Quote:
|
|||||||||||||
|
|
|
|
11-11-09
|
#8 (permalink) | ||||||||||||
|
*cough* Stock *cough*
|
Yeah it will work fine I run 2 seagate 7200.12 1TB in raid0 along with 2 other older hdds i have.
__________________
AUS ONLY Want some Parts of my PC or the whole thing? PM me. AUS ONLY Quote:
|
||||||||||||
|
|
|
11-11-09
|
#9 (permalink) | ||||||||||||||
|
4.0 GHz
|
Alright let me clear up my question
 While running a RAID Configuration with two hard drives, than adding another hard drive using the same molex connector (Power Connector) affect performance in anyway? Or should I stay "safe" and use another molex connector for the third hard drive?
__________________
4.0GHz CPU-Z Validation Socket 1156 (Core i3/i5/i7) Club & Discussion Quote:
Quote:
|
||||||||||||||
|
|
|
|
11-11-09
|
#10 (permalink) | |||||||||||||
|
Case Modder
|
Won't make a difference at all. (well at least for me).
__________________
The Better HAF Process Frosty: The Snow TowerThe HAF 932 Case Owners ClubGeorgia State OverclockersAIM - tKBaha
|
|||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
AUSSIE OCN CLUB
