whe3ls

there out
http://www.petrastechshop.com/cuhdcokitbyi.html

__________________

Danker16

i need 4850 heatsinks

__________________
1. AnTec Nine Hundred

2. Fan Controller controls :CPU,Front Fans, Top Fan
3.Exhausts Fan is controlled by Tri-Cool manual switch through the rear hose hole
4. ATi HD 4850 with Accelero S1 with a Tri-Cool fan controlled by manual 3 speed switch through rear hose hole

GuardianOdin

iandh heatsinks rock, glad he's a member here

__________________
I draw stuff Gallery Lapping your CPU and Heatsink ¡¡¡ʍʇɟ qn1ɔ uoıʇɐıɔǝɹddɐ 939 ʇǝʞɔos ǝɥʇ F@H AMD & Intel-ATI & Nvidia average ppd Please lets all FOLD for eachother!. Lets Unite!

DuckieHo

Pics of them mounted?

__________________
WANTED: Socket M Core/Core 2 CPU, SUGO-02 Black, quality 802.11b/g PCI Card
To answer most of your questions: (1) a fridge cannot cool a PC (2) 64-bit OS for over 3.4GB (3) If a PCIe card fits, it will work (4) Resolution, not screen size (5) If you have a question, it is not news (6) Report, not respond to Spam (7) Single/Non-Modular Rail PSUs are NOT better than Multi-Rail/Modular

gymenii

Looks cool in red, but the heat generated by the memory and vrm's, I would only trust cooper sinks..... need to see results asap!


Pertas?

__________________
E6850@4Ghz

iandh

haha, I made the news page.

My shop was tied up on a super hot job so these took a little longer than usual. Luckily it looks like the 4870's should stick around for at least a little bit.

It's hard to see in the pics but the VRM sinks are a bit taller than standard height since these run a bit hot. Good case airflow is a must with this card.

dr4gon

those are sexy!

If they're good enough for the nvidia cards, they're enough for the ATI's as well. Memory doesn't need too much. It should be sufficient despite its small size.

__________________
Project: Orange Box
Join the New OCN Flickr Group - My Flickr
>>> For Sale: <<<
Team Fortress 2 - Add OCN @ 8.9.16.94:27015 to your favorites.

GuardianOdin

look around the forums, many of us use iandh heatsinks and they do work very well.

__________________
I draw stuff Gallery Lapping your CPU and Heatsink ¡¡¡ʍʇɟ qn1ɔ uoıʇɐıɔǝɹddɐ 939 ʇǝʞɔos ǝɥʇ F@H AMD & Intel-ATI & Nvidia average ppd Please lets all FOLD for eachother!. Lets Unite!

iandh

Yeah, these cards are screamers but I've tested two different brand 4870's from two different places with these for over three weeks and no trouble yet. Hottest recorded temp on one was slightly over 90C on the vrm's and they are rated to 110C IIRC. I work at an electronics manufacturer and that is not an unusal temp for VRM's to reach.

As I said, good case airflow is a MUST with this card, no matter what cooling you have... unless an FC water block but even then there are still hotspots on the card.

Mmansueto

very nice looking. I will be getting these today. Ian, did you initially use the stock heatsink on the 4870 with the MCW60? If so, do you have any comparisons between the two?

__________________
TV Guide

Water Cooling Setup:

CPU Loop: Tribal Overkill Reservoir-MCP355 w/custom IandH Brass Top-MCR320-Apogee GT-MCR120-Apogee GT-Tribal Overkill Reservoir

GPU Loop: Tribal Overkill Reservoir-MCP655-MCR220-X38 NB-EK 4870X2-DangerDen SB-Tribal Overkill Reservoir