|
![]() |
Overclock.net - Overclocking.net > Intel > Intel Motherboards > Intel BIOS | |
Help OC ASUS P5N32-E SLI Plus
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | ||||||||||||
|
Intel Overclocker
|
I have a new ASUS P5N32-E SLI Plus mb with a Q6600 CPU. I can get it to OC to 2.7 GHz (2.4 is stock), but when I try to go higher, it freezes up. Here are my particulars:
__________________CPU Intel Q6600 2.4 GHz 4 GB of Corsair PC2-8500 C5 RAM Dual BFG 8800 GTX OC2 Video cards in SLI 1000 Watt PSU Noctua NH-U12F CPU cooler w/ fan Thermaltake Extreme Spirit II coolers for NB/SB Chipsets Stock cooling fins for Mosfet chips. (Cut off from heat pipe) Settings in Bios (0805): Pretty much everything is disabled including Spectrum settings Memory is unlinked and set at 800 MHz. 5-5-5-15 2T timing CPU Vtt 1.55V, Memory 2.15V, Vcore 1.4V, 1.2 HT 1.3 V, NB 1.4V, SB 1.5V Multiplier is at 9. 300X9 gives 2700 MHz. I run 3DMark06 and get over 14,000 and the CPU temp after the CPU tests is 45 C, versus 56 with stock cooler. Then if I try to use the AI Booster or bios to go to 2800 MHz, the computer freezes up. Any help is appreciated.
|
||||||||||||
|
|
|
|
|
#2 (permalink) | ||||||||||||
|
Networking Nut
![]() |
change ur bios to 0801 mine was the same could'nt get passed 2.7GHz until i went to 801 then 1333 booted straight into windows first time.
|
||||||||||||
|
|
|
|
|
#3 (permalink) | ||||||||||||
|
Intel Overclocker
|
Thanks for your help. I have been sick, so it took me a while to get back to you. I tried to use the flash utility in the bios, but it didn't work. I was able to get in and reset to defaults so I can boot from a floppy. I created a boot floppy and a second floppy with the bios file and afudos.exe on it (unzipped). After booting to dos, I insert the second disk and enter afudos /i and also tried afudos /ip5n32.rom but I get the same result. I get 2 messages. ASF Signature not found and ERROR: BIOS has no flash information available. Can you tell me how you did yours, and can you tell me what I am doing wrong. Thanks in advance.
__________________
|
||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|