|
![]() |
Overclock.net - Overclocking.net > Intel > Intel Motherboards > Intel BIOS | |
Overclock Q6600, 3.2 or 3.6ghz.
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) |
|
New to Overclock.net
|
Hi everyone! Got my new computer today. And i was wanting to clock it to atleast 3.2ghz rather safe then not
. Was thinking 3.6 first but not sure if i can run it stable at that without boinking it. I was wondering if someone could help me quick with setting and the like. You guys are experts and since this is my first time and the computer cost me rather a lot as i'm a student and all :P. If someone is familiar with the motherboard and Q6600 setting for clocking it close where i want it, i would be SOOOO happy! ![]() Thx a lot my computer specs are below! Remix1121! Thermalright Ultra-120 eXtreme Socket 775 / AMD Western Digital Raptor WD1500ADFD 150GB 10000rpm 16MB Cache SATA Intel Core 2 QUAD Q6600 2.4GHz 8MB FSB1066 Boxed (with cpu-cooler!) Socket 775 2x SLI BFG GeForce 8800GTS OC 675MHz GPU 512MB DDR3 TV-out HDTV DUAL DVI SLI-ready RETAIL PCI Express 2x 8gb OCZ Platinum XTC 2x2048MB (tot. 4096MB) DDR2 PC2-8000 1000MHz 5-5-5-18 XFX MB-N780-ISH9 nForce 780i 4DDR2-DIMM 2PCI 4PCIe SATA Raid Audio GB-LAN Firewire Socket775 ATX Cooler Master RS-700-ASAA-A1 Real Power Modular 700W ATX 12V 2.2 & EPS12V 16dBA Cooler Master Cosmos 1000 Last edited by Remix1121 : 03-10-08 at 03:48 AM |
|
|
|
|
|
#2 (permalink) | |||||||||||||
|
AKA Murclocke
![]() |
Ultra-120 should be able to run that at 3.6 as long as you have two good fans on it.
Every computer is different there is no 'set' overclocking settings. You will need to experiement with that and read some overclocking guides. These are the 3 needed tools for overclocking your CPU/RAM, minus your bios .Prime95 v25.6 (CPU Stability Testing) Memtest86+ v2.01 (RAM Stability Testing) Core Temp v0.97.1 (CPU Temp Monitor)
__________________
Last edited by Murlocke : 03-10-08 at 03:44 AM |
|||||||||||||
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|