vodafone19

take a look at my settings for my bios. what should i change? is anything off? thanks for looking

DeRock131

All settings look good, you can run your tracers at ddr2 989 and 4-4-4-12 timings and be stable :-0

Also what was your OC before, or were you just making sure that your settings are correct?

vodafone19

just making sure my setting are right. i'm going to change my timing now to 4-4-4-12 and see if it is stable. thanks for your respond.

vodafone19

oh wait...my timing on my tracer is 5-5-5-15 right now. should i go 4-4-4-12?

DeRock131

Your tracers will never be stable at that speed at 4-4-4-12. I doubt they will even be stable at 5-5-5-15 at that speed. You may want to bump it down to a 1:1 divider (ddr2 824) at 5-5-5-15 and go up from there.

And is this the first OC on this chip or are you tinkering with it? What were your stable settings?

vodafone19

i been moving up from 3.0 to 3.2 to 3.6 and now at 3.7 stable. now im tweaking the ram. i got it at 5-5-5-12 stable. with 989 mhz. i cant get any lower then that. i been running at 3.7 for about 2 weeks now.