|
|
|
 |
Overclock.net - Overclocking.net > Intel > Intel Motherboards > Intel BIOS | |
New board will not post
|
||
 |
|
|
LinkBack | Thread Tools |
11-21-08
|
#1 (permalink) | |||||||||||
|
Intel Overclocker
 
|
New board will not post
DFI LANPARTY DK X38-T2RB
I recently purchased one of these boards. Everything worked fine on the previous rig. tested ram by switching slots and ram from my sons computer. removed video cards and the same error code. new hdd same error. tested power supply power supply is good. getting error code 7f. please help
__________________
Starbucks Biggest Fan The Viper Pilot not the Coffee Shop
|
|||||||||||
|
|
|
11-25-08
|
#2 (permalink) | |||||||||||||
|
Sleepin wit da fishes
 
|
I know your thread is a few days old but I had this same issue and it turned out that the video card was not all the way into the x16 slot I had to reseat it and really give it a push to get it all the way in there. Also check that your power is connected to the card. Like I said I got that same code and it was a gpu issue for me.
__________________
Quote:
E8400 E0 4.4ghz 8 hours Prime Stable!
|
|||||||||||||
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
