|
|
|
 |
Overclock.net - Overclocking.net > Intel > Intel Motherboards > Intel BIOS | |
My first intel build need some guidance
|
||
 |
|
|
LinkBack | Thread Tools |
02-14-09
|
#1 (permalink) | |||||||||||||
|
Overclocker
 
Join Date: Jun 2007
Location: NORTH CAROLINA
Posts: 1,753
Rep: 160
 Unique Rep: 141
Trader Rating: 15
|
My first intel build need some guidance
These are the hardware parts i'm working with
http://www.newegg.com/Product/Produc...82E16813138118 http://www.newegg.com/Product/Produc...82E16820231194 http://www.newegg.com/Product/Produc...82E16819115036 I will be asking a few questions because some of the wording and terms are not what i'm used to. Right now I have it booted up on the dining room table just letting it burn in and just trying to make sense of where everything is. I assume that C1E and speedstep need to be disabled to start my overclock, ANYTHING else?? Ok, temps in bios are 22c. Under O.N.E. tab here is where i have sum Q/ cpu freq setting ( 333 ) I can't change that!?!? FSB (bsel) there are 4 options auto,800,1066,1333 do i set that in relation to my cpu 1333? Also under dram freq there are 8 options auto,667,800,833,1000,1066,1110,1333 is this like amds HT? to tell ya truth i'm lost and i need your guys help. Remember its sitting just burning in no hard drive no optical drives no OS yet. MY ultimate goal is 4.2 / 4.4 on air!! 
__________________
IF IT'S BROKE, FIX IT! IF IT'S NOT BROKE FIX IT SOME MORE!!!!!  http://service.futuremark.com/compare?3dm06=7263495 http://valid.canardpc.com/show_oc.php?id=536862 The BIOSTAR T-Power I45 Club CM Storm + Sniper CLUB
|
|||||||||||||
|
|
|
02-14-09
|
#2 (permalink) | ||||||||||||
|
Case Modder
 
|
auto,800,1066,1333 should be nb strap think and the other ones are dram speed according to the strap you are in. If you choose one of the options instead of auto it will limit you to speeds that you run depending on what strap for nb you are in.
__________________
 Corsair XMS2 675MHz @ 800MHzQuote:
|
||||||||||||
|
|
|
|
02-14-09
|
#3 (permalink) | |||||||||||||
|
Overclocker
Join Date: Jun 2007
Location: NORTH CAROLINA
Posts: 1,753
Rep: 160
Unique Rep: 141
Trader Rating: 15
|
So if i choose 1333 fsb I should choose 1110 in my dram for these PI'S?
Also, i can not figure out how to raise the FSB, say like 410 to 415? I just don't see it!
__________________
IF IT'S BROKE, FIX IT! IF IT'S NOT BROKE FIX IT SOME MORE!!!!! http://service.futuremark.com/compare?3dm06=7263495 http://valid.canardpc.com/show_oc.php?id=536862 The BIOSTAR T-Power I45 Club CM Storm + Sniper CLUB
Last edited by FREELINE57 : 02-14-09 at 04:37 PM |
|||||||||||||
|
|
|
|
02-14-09
|
#4 (permalink) | ||||||||||||||
|
Intel Overclocker
 
Join Date: Oct 2007
Location: Berkshire, England
Posts: 1,270
Rep: 79
Unique Rep: 75
Trader Rating: 7
|
Well you need a HDD and OS to check everything, you won't know if its stable or the correct temps as the bios read out is often wrong.
__________________
Quote:
|
||||||||||||||
|
|
|
|
02-14-09
|
#5 (permalink) | |||||||||||||
|
Overclocker
Join Date: Jun 2007
Location: NORTH CAROLINA
Posts: 1,753
Rep: 160
Unique Rep: 141
Trader Rating: 15
|
What i mean is i don't even see a setting where to change the FSB. I didn't even think you needed a hhd just to locate the option IN THE BIOS to change the FSB?
__________________
IF IT'S BROKE, FIX IT! IF IT'S NOT BROKE FIX IT SOME MORE!!!!! http://service.futuremark.com/compare?3dm06=7263495 http://valid.canardpc.com/show_oc.php?id=536862 The BIOSTAR T-Power I45 Club CM Storm + Sniper CLUB
|
|||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
THE 1080p+ MAX OUT
