|
|
|
 |
Overclock.net - Overclocking.net > Intel > Intel Motherboards > Intel BIOS | |
Big post issue
|
||
 |
|
|
LinkBack | Thread Tools |
02-25-09
|
#1 (permalink) | |||||||||||||
|
Linux Lobbyist
 
|
Big post issue
So my sig rig has been stable at 3.2ghz 534fsb @ 1.36v for a while.
I had a issue trying Mass Effect were it froze and I had to hard reset, well after that my raid corrupted so I had to rebuild it and install my os again. Anyways since then when I restart my computer the light comes on then suddenly shuts off and will keep doing this until I physically shut off my psu (flip power switch). I was thinking my bios is gettinh corrupted due to the fact when my computer failed to boot in the past it would go yo my second bios. I have checked my wiring and it all looks good. Also I added a wireless pci adapter but the problem happened before I installed it. I thought maybe the psu? I only have a 550w enermax which isnt strong enough for my system. ANY insight would be greatly appreciated. pink
__________________
Quote:
Quote:
|
|||||||||||||
|
|
|
02-25-09
|
#2 (permalink) | |||||||||||||
|
Graphics Card Aficionado
 
|
Sounds kind of like a bad PSU. Enermax had some shady build quality. Maybe test with another PSU?
__________________
Quote:
Steam/TF2 Name: [OCN]Rubbish
|
|||||||||||||
|
|
|
|
02-26-09
|
#3 (permalink) | |||||||||||||
|
Linux Lobbyist
|
What I mean by I only have a 550w Enermax is that is all I have as a spare. My main rig (sig rig) has a Silverstone 750w single 60a rail, which should be more then enough for my system.
pink
__________________
Quote:
Quote:
|
|||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
