Hey yall, Ive researched and tried soo many different combinations.
My final findings are this, especially if you have a motherboard with good anti vdrop.
I have my FSB termination voltage set to 1.20v max is 1.50v
After experimenting and trial and test. I can give confident advice that anyone who is a serios OCer set your FSB term to 1.20v
But you must MAX out the NB voltage if you want stability. look @ my sig,, thx and gl
CPU
Intel Core 2 Q6600 GO @ 3760 Mhz@1.504v 0.0 vdrop |
Motherboard
ASUS P5K @ 1880 Mhz FSB @1.7v Pencil Voltmod 470x8 |
Memory
G.SKILL PC8000 8GB 2GBx4@ 940 Mhz@2.10v@5-5-4-12 |
Graphics Card
EVGA 8800 GT SC @740/1850/1085 Mhz@1.1v |
Hard Drive
Tt iCage SATA WDC 320GB & 120GB Barracuda 80GB |
Sound Card
ASUS Xonar D2/PM & M-AUDIO BX8a Deluxe Monitors |
Power Supply
Tt ToughPower Modularized Cable Managment@700w |
Case
Black Full Tt Big WaterSE Tt P500 Pump & TMG2 Rad |
CPU cooling
Tt Copper WaterBlock |
GPU cooling
EVGA Stock |
OS
Windows 7 Ultimate x64 RTM 7600 |
Monitor
24" Sony FW900@ 2304x1440@80hz/23"Dell W2300 HDTV |
A little info about FSB termination voltage and what to set it at.
04-17-09
A little info about FSB termination voltage and what to set it at.
