|
![]() |
Overclock.net - Overclocking.net > Intel > Intel Motherboards > Intel BIOS | |
Will a BIOS Flash Ruin my RAID Partition
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#11 (permalink) | ||||||||||||||
|
Intel Overclocker
|
Quote:
|
||||||||||||||
|
|
|
|
|
#12 (permalink) | |||||||||||||
|
Overclocker in Training
|
It didn't for me. If I flash my BIOS which I've done numerous times lately, it'll flash that I'm using a RAID, and which drives are on the array, but if I put RAID back to enabled, and make it so SATA 1 and 2 are on RAID, then my Mediashield w/e manager recognized the array right away.
__________________P.S: Not using my Perc for this. Using the mobo's raid support. Lack of cables.
|
|||||||||||||
|
|
|
|
|
#13 (permalink) | ||||||||||
|
4.0 GHz
![]() |
It's not the flash that sets things back to default, You should do that yourself after the flash to make sure nothing gets turned on you didn't want. And anytime you reset CMOS you will loose the RAID setting on the controller and have to turn it back on. It's no big deal as once you turn it back on it will recognize your array.
__________________
|
||||||||||
|
|
|
|
|
#14 (permalink) | |||||||||||||
|
Luck : 10pts
![]() |
Buddy when i was done there wasn't a shred of the old BIOS systems on that board. You just have to go back and turn on the RAID controller, then add the array back to the list. It may be different for different chipsets though.
__________________
|
|||||||||||||
|
|
|
|
#15 (permalink) | |||||||||||||
|
Overclocker in Training
|
SUCCESS!!! Now let's see if it will help me hit 4GHz...
__________________
Crysis Benchmark DX10 Very High Settings 1680x1050 - 28.725 FPS High Settings 1680x1050 - 46.660 FPS Forceware - 191.07 3DMark06 - 17443 GPU OC Validation CPU OC Validation Verizon FiOS Speed Test Result
|
|||||||||||||
|
|
|
|
|
#16 (permalink) | |||||||||||||
|
Luck : 10pts
![]() |
Goodluck to you.
__________________
|
|||||||||||||
|
|
|
|
#17 (permalink) | ||||||||||||
|
Case Modder
![]() |
No, but you would have to reconfigure the bios setting for your raid setup, make sure to set SATA to raid.
__________________
|
||||||||||||
|
|
|
|
|
#18 (permalink) | |||||||||||||
|
Overclocker in Training
|
Thanks. It's good to go!
__________________
Crysis Benchmark DX10 Very High Settings 1680x1050 - 28.725 FPS High Settings 1680x1050 - 46.660 FPS Forceware - 191.07 3DMark06 - 17443 GPU OC Validation CPU OC Validation Verizon FiOS Speed Test Result
|
|||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|