max302

I've been trying to get my latencies tighter on my DFI board (in sig rig), and I have read numerous times around the net that my RAM, G.Skill Pi Black, can do 800mhz@4-4-4-12-1T on stock volts. I've made the change from 5-5-5-15 to 4-4-4-12, but 1T is nowhere to be found! I looked for anything with Cycle in the name in the DRAM settings, but I really can't find it. I tried disabling and re-enabling the "Advanced mode", with no avail?

Is my board incapable of running 1T? Help?

__________________

thehighlander123

i have yet to find a dfi board that lets u change the command rate

u might be able to do it using memset

__________________
There can be only one! help me find a case (less than 150 shipped) http://www.overclock.net/wanted/5291...ml#post6532218
Dual Loop:
custom pvc res=>DDC3.2w/xspc acrylic top=>DDC 3.2 w/xspc acrylic top=>Black Ice Extreme GTX 360(3xUK 3000's pulling)=>mcr 120=>Apogee GT (bowed)=>res

DDC Ultra w/xspc res-top=>RX360(3x pana Ultras pulling)=>enzotech nb block=>Dtek GFX 2=>res-top