|
|
|
 |
Overclock.net - Overclocking.net > Intel > Intel - General > Intel Build Logs | |
XMAS Conroe Build (finally OCed!!!!!)
|
||
 |
|
|
LinkBack | Thread Tools |
12-25-06
|
#1 (permalink) | ||||||||||||||
|
Overclocker in Training
 
|
XMAS Conroe Build (finally OCed!!!!!)
got this for my build
E6400 P5B Deluxe 2gb Crucial Ballistix Armor Scythe Infinity 2x 250GB Seagate (perp rec) X1950Pro Silencer 750 got it all put together with no problems, took pics along the way. however when i went to install windows im having a bit of a problem. when it came up i pressed F6 but nothing happened immediately, after it went through some of the stuff at the bottom it said something about not being able to see the disks, and if i had a driver disk to press S. so i did that and installed the drivers for the intel ich8r raid off of a floppy. it then went through some more stuff and asked me to press enter, and then F8 to accept. then on the screen where it shows partitions/disks it had 4 things that said something along the lines of unidentifiable disks. and when i pressed the arrows to try to scroll down it gave me a BSOD. will post pics once its up and running since the card reader is hooked to it. anybody have some ideas to what i can try to do to get it running?
__________________
Quote:
Last edited by g8m3rtag : 01-01-07 at 04:20 AM |
||||||||||||||
|
|
|
12-25-06
|
#2 (permalink) | |||||||||||||
|
4.0ghz
 
Join Date: Jan 2006
Location: Long Island, NY
Posts: 5,714
Rep: 350
 Unique Rep: 207
Trader Rating: 10
|
well dam nice build. Good luck with it. That e6400 is of a good week and revision.
__________________
|
|||||||||||||
|
|
|
12-25-06
|
#3 (permalink) | ||||||||||||||
|
Overclocker in Training
|
any ideas why my hard drives arent showing up on the windows install screen and why it bsod's there
__________________
Quote:
|
||||||||||||||
|
|
|
|
12-25-06
|
#4 (permalink) | |||||||||||||
|
4.0ghz
Join Date: Jan 2006
Location: Long Island, NY
Posts: 5,714
Rep: 350
Unique Rep: 207
Trader Rating: 10
|
check all your settings in the bios and the volts and what not. Also are you doing raid?
__________________
|
|||||||||||||
|
|
|
|
12-25-06
|
#5 (permalink) | ||||||||||||||
|
Overclocker in Training
|
yea im doin raid 0 with it, i chose the ide configuration as raid as well. what should the voltages be?
bios is 0507, i have the hard drives plugged into the two red ports above the two black ports if that matters. VCORE = 1.28 3.3V = 3.32 5V = 4.99 12V = 12.14 i dont see any other voltages
__________________
Quote:
|
||||||||||||||
|
|
|
|
12-25-06
|
#6 (permalink) | ||||||||
|
ATI Enthusiast
 
|
I think they should be in the black ports not the red ports........I might be wrong though
__________________Also, there is another RAID option in bios......under Onboard Devices. Choose JMicron - Raid
|
||||||||
|
|
|
|
12-25-06
|
#7 (permalink) | ||||||||||||||
|
Overclocker in Training
|
i see the jmicron one, but doesnt intel have a raid controller. i have no idea which ports are intel using the ich8r controller and which ones are using the jmicron controller
__________________
Quote:
|
||||||||||||||
|
|
|
|
12-25-06
|
#8 (permalink) | |||||||||||||
|
Intel Overclocker
|
yeah i think raid is black ones
__________________
|
|||||||||||||
|
|
|
|
12-25-06
|
#9 (permalink) | ||||||||
|
ATI Enthusiast
|
I have mine plugged into the black ports and have both IDE Config Raid & JMicron Raid enabled.
__________________I had issues without doing the above. Also, have you setup the setup the array? You do this by pressing an 'F' key just after post
|
||||||||
|
|
|
|
12-25-06
|
#10 (permalink) | ||||||||||||||
|
Overclocker in Training
|
going to try the F key thing real quick
__________________
Quote:
|
||||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
