|
![]() |
Overclock.net - Overclocking.net > Intel > Intel - General > Intel Build Logs | |
just booted for the first time--please help
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#11 (permalink) | ||||||||||||
|
Folding Fanatic
|
well you're getting power to everything, so it seems.
i don't know for sure, but possibilities are things like no power to something important or something important is DEAD. hopefully not your CPU or MOBO. do you have an old system laying around that you can throw old parts into to test what is wrong with your new one?
|
||||||||||||
|
|
|
|
#12 (permalink) | ||||||||
|
New to Overclock.net
|
strip your computer down to the bare requirements.... motherboard, ram and cpu and if it still doesnt boot try get a hold of new ram and cpu to test if either of them is faulty
__________________if it does boot after stripped to the minimum system start replacing each adaptor card individually until the faulty device is identified thats stopping your computer from booting it could also be your power supply.. you may want to test it with a meter or try replacing it with another? also something a lot of people forget to do while commissioning is connect the extra 4 pin power supply to the motherboard for the cpu
|
||||||||
|
|
|
|
|
#13 (permalink) | ||||||||||||
|
New to Overclock.net
|
the mobo is coming on just fine. I hope it's not the cpu as I dont have another mobo that is capable of running it to test that theory.
__________________I don't think it's the power supply because my rhoebus controller and optical drive both came on and worked just fine.
|
||||||||||||
|
|
|
|
|
#14 (permalink) | ||||||||
|
New to Overclock.net
|
try disconnecting all that extra stuff and see if it boots up
__________________
|
||||||||
|
|
|
|
|
#15 (permalink) | ||||||||||||
|
New to Overclock.net
|
just did; still no image
__________________
|
||||||||||||
|
|
|
|
|
#17 (permalink) | ||||||||||||
|
Overclocker
|
i had the exact same problem with the same board, twice in a row, i just gave up, and got an asus P5kC, and it works just fine.
__________________
Think like a glow worm, no matter what happens, the light will always shine out of your arse. =]
|
||||||||||||
|
|
|
|
|
#18 (permalink) | ||||||||||||
|
Overclocker
|
take out the motherboard and then just connect the psu to the motherboard and see if it boots, if it does make sure that there are no screws or anything doing electric contact with the motherboard or case.
|
||||||||||||
|
|
|
|
|
#19 (permalink) | |||||||||||||
|
PC Gamer
|
Are you sure that you aren't plugged into your mobos onboard video?
EDIT: Nevermind, I see now that you're using onboard video.
Last edited by Arbiter419 : 06-28-08 at 12:15 AM. |
|||||||||||||
|
|
|
|
|
#20 (permalink) | |||||||||||||
|
Opteron 170 3.1
|
Havnt seen this suggested, but did you disable onboard video before installing the gpu?
__________________
|
|||||||||||||
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|