Overclock.net - Overclocking.net
     
 
Home Gallery Reviews Blogs Register Today's Posts Mark Forums Read Members List


Go Back   Overclock.net - Overclocking.net > Intel > Intel - General > Intel Build Logs

Reply
 
LinkBack Thread Tools
Old 11-09-08   #11 (permalink)
First Time Build
 
intel ati

Join Date: Oct 2008
Location: Atlanta, GA
Posts: 52

Rep: 0 totaleclipse82 Unknown
Unique Rep: 0
Trader Rating: 0
Default

^Mercy:
-That is the PSU I'm going with...
-I dont think that the Q9650 is worth the extra money...specially if i can get e0 q9550
-I will Consider the Gskill ram and look into it, but i don't really plan on overclocking the ram... But this Gskill set is cheaper than the Corsair...
-I'm sticking with the Noctua cooler
-and I've already purchased the WD Blk Caviar HD, no turning back now.
__________________
System: Tha BandWagon?
CPU
Q9550 E0
Motherboard
ASUS Rampage Formula
Memory
4GB Corsair Dominator 1066
Graphics Card
Sapphire HD 4870 1GB
Hard Drive
WDCavBlack750GB 32MBCache
Power Supply
Corsair 750W ATX12V
Case
CM HAF 932
CPU cooling
Noctua NH-U12P
OS
Vista 64bit
Monitor
Wacom Cintiq 21UX
totaleclipse82 is offline   Reply With Quote
Old 11-09-08   #12 (permalink)
4.0 GHz
 
Cpt.Hawkins's Avatar
 
intel ati

Join Date: Jun 2007
Location: Oxford/Newcastle,UK
Posts: 226

Rep: 38 Cpt.Hawkins is acknowledged by some
Unique Rep: 34
Trader Rating: 0
Default

I think the E0 stepping of the Q9550 is slightly over-hyped, i'm sure there are slight overclocking advantages but to be fair im running a C1 Q9550@4.0GHz!! at 1.38V, and it doesent go above 55c whilst gaming hard hours on end.
So if i were you i wouldnt worry about spending a bit more trying to get a E0 just save up for a 4870X2! you know you want one!
Attached Thumbnails
My Build Log, Input Needed-kick-ass-system.jpg  
__________________
22114 3DMark06


Quadcore At 4.0GHz



Official OCN Camera Club

Nikon D700 | NIKKOR 24-70mm f/2.8 | NIKKOR 105mm Macro VR f/2.8 |SB-900 Speedlight|

System: Gaming System
CPU
Intel Q9550(C1)@ 4.0Ghz
Motherboard
Striker ll Formula 780i
Memory
4GB Dominator PC2-8500
Graphics Card
ATI Radeon 4870X2
Hard Drive
OS on 36Gb Raptors in RAID0
Sound Card
Optical Out>Beresford DAC>Creek OBH-21SE Amp
Power Supply
850W coolermaster power pro modular
Case
Coolermaster Cosmos 1000
CPU cooling
Zalman CNPS9700
GPU cooling
stock
OS
Vista 64-bit
Monitor
Samsung 2693HM 26" 1920x1200
Cpt.Hawkins is offline   Reply With Quote
Old 11-09-08   #13 (permalink)
om nom nom
 
-iceblade^'s Avatar
 
intel

Join Date: Apr 2008
Location: On earth, thankfully.
Posts: 7,676

Rep: 560 -iceblade^ is becoming famous-iceblade^ is becoming famous-iceblade^ is becoming famous-iceblade^ is becoming famous-iceblade^ is becoming famous-iceblade^ is becoming famous
Unique Rep: 422
Trader Rating: 3
Default

Quote:
Originally Posted by totaleclipse82 View Post
-I just noticed that the DVD burner I have is IDE. I guess I need a SATA right? Will there be a big difference in the time it takes to burn a DVD if I stay with the IDE?

-4 GB ram vs 8 GB ram, is there a noticeable difference in gaming or photoshop?

-Do I need a fan controller?
-and do I need to replace some of the fans?
-What is the reason that people replaced their fans? Cuz of CFM or Noise?

Fan controller:
http://www.newegg.com/Product/Produc...82E16811998038
get the Corsair
get the Q9550 - it will OC well even if it is not e0.
get 8gb of ram. it will help in Photoshop.
i have an IDE DVD drive. as far as burning discs, it is fine. i have never used a SATA drive before, but it is perfectly fine for what i use it for

is that tablet a monitor?
__________________
must... help... moar...


System: Mr. Bubbles
CPU
Intel Atom N280 (1.66ghz)
Memory
1GB DDR2 533mhz
Graphics Card
Intel GMA 950
Hard Drive
160GB Hitatchi (5400rpm)
Power Supply
5800mAh 6-cell battery
OS
Windows 7 Professional x86
Monitor
10.1" 1024x600 display
-iceblade^ is offline Overclocked Account   Reply With Quote
Old 11-09-08   #14 (permalink)
First Time Build
 
intel ati

Join Date: Oct 2008
Location: Atlanta, GA
Posts: 52

Rep: 0 totaleclipse82 Unknown
Unique Rep: 0
Trader Rating: 0
Default

Cpt. Hawkins:
-Ok, I think I'm going to go ahead and order everything tonight then, I'm tired of waiting on e0 anyways.
-4870x2 is only good when your running lots of resolution right? Their is a minimal difference when your not running really high resolution? I think I'm going to stick with the 4870, maybe when prices drop I will upgrade to x2. If my gaming lags, I will step it up sooner!

iceblade^:
-Yea.. I've heard more about the Corsair then the Gskill, I was sticking with Corsair.
-I will stick with IDE, i can always switch later, it's not like burners are expensive anyways...I can remember when CD burners were 200 dollars... what a rip.
-I'm going to stay with 4gb ram for now, upgrade to 8 later I think
__________________
System: Tha BandWagon?
CPU
Q9550 E0
Motherboard
ASUS Rampage Formula
Memory
4GB Corsair Dominator 1066
Graphics Card
Sapphire HD 4870 1GB
Hard Drive
WDCavBlack750GB 32MBCache
Power Supply
Corsair 750W ATX12V
Case
CM HAF 932
CPU cooling
Noctua NH-U12P
OS
Vista 64bit
Monitor
Wacom Cintiq 21UX
totaleclipse82 is offline   Reply With Quote
Old 11-19-08   #15 (permalink)
First Time Build
 
intel ati

Join Date: Oct 2008
Location: Atlanta, GA
Posts: 52

Rep: 0 totaleclipse82 Unknown
Unique Rep: 0
Trader Rating: 0
Default

Well... I received my parts in the mail the last couple of days. I did not realize how big the CPU Heat sink is and the Haf932 is HUGE. I could hide inside that thing if need be.! I got an E0 CPU!! that is cool,ordered it from newegg. I think that my Video card might be bent?? Look at the pictures in the next post and tell me if its normal??

I started putting some of the part in but ran in to some things that i was unsure of.

-Do i need to clean the CPU and the Heatsink with ArctiClean Thermal Surface Purifer even thought i've never applied thermal paste before??

-Which thermal paste should i use? The Noctua NT-H1 that came with my Noctua Heat sink or the Arctic Silver - 5 ???

-Do i put the 4870 on the bottom PCI slot of the top? They are both PCIx16. The bottom slot would be closer to the PSU versus being closer to the CPU/RAM.

-Does it matter the orientation of the heat sink on the CPU? If i only have one fan attached to it should it be facing down towards the 4870/PSU or up towards the top fan??
__________________
System: Tha BandWagon?
CPU
Q9550 E0
Motherboard
ASUS Rampage Formula
Memory
4GB Corsair Dominator 1066
Graphics Card
Sapphire HD 4870 1GB
Hard Drive
WDCavBlack750GB 32MBCache
Power Supply
Corsair 750W ATX12V
Case
CM HAF 932
CPU cooling
Noctua NH-U12P
OS
Vista 64bit
Monitor
Wacom Cintiq 21UX

Last edited by totaleclipse82 : 11-20-08 at 10:51 AM
totaleclipse82 is offline   Reply With Quote
Old 11-20-08   #16 (permalink)
First Time Build
 
intel ati

Join Date: Oct 2008
Location: Atlanta, GA
Posts: 52

Rep: 0 totaleclipse82 Unknown
Unique Rep: 0
Trader Rating: 0
Default

Does this look bent? or is this normal?
__________________
System: Tha BandWagon?
CPU
Q9550 E0
Motherboard
ASUS Rampage Formula
Memory
4GB Corsair Dominator 1066
Graphics Card
Sapphire HD 4870 1GB
Hard Drive
WDCavBlack750GB 32MBCache
Power Supply
Corsair 750W ATX12V
Case
CM HAF 932
CPU cooling
Noctua NH-U12P
OS
Vista 64bit
Monitor
Wacom Cintiq 21UX

Last edited by totaleclipse82 : 11-20-08 at 11:23 AM
totaleclipse82 is offline   Reply With Quote
Old 11-22-08   #17 (permalink)
PC Gamer
 
tibor28's Avatar
 
intel nvidia

Join Date: Jul 2008
Posts: 218

Rep: 13 tibor28 Unknown
Unique Rep: 13
Trader Rating: 0
Default

Quote:
Originally Posted by totaleclipse82 View Post
Does this look bent? or is this normal?
That is bent! Definitely doesn't look normal but as long as it works who cares
__________________
FOLDING FOR THE OCN.net TEAM (37726)
Support the community and start folding for the cause!

System: My System
CPU
Quad core Q6600 @ 3.0ghz @ 1.184V
Motherboard
Asus P5N-D 750i (volt modded)
Memory
A-data Vitesta 2x 2gb 1066mhz 5-4-4-12
Graphics Card
Zotac Geforce GTX 260 651/1405/2100
Hard Drive
Hitachi 320gb 7200rpm
Sound Card
Onboard realtek HD audio
Power Supply
Sharkoon SilentStorm 700W
Case
Zegamax Orca
CPU cooling
Arctic Cooling Freezer 7 Pro
GPU cooling
Stock
OS
Vista Ultimate 64bit/ XP 32bit
Monitor
24" Samsung Syncmaster 245B
tibor28 is offline   Reply With Quote
Old 11-22-08   #18 (permalink)
PC Gamer
 
litho's Avatar
 
intel nvidia

Join Date: Aug 2008
Location: By my screen
Posts: 506

Rep: 39 litho is acknowledged by some
Unique Rep: 36
Trader Rating: 3
Default

holy crap that is bent pritty bad i would exchange you never know what problems it might cause later on. Plus later on they might not let u rma since they might think you had something to do with it being bent. If I were you I would try to exchange it to avoid possible problems.

System: LITHO-MACHINE
CPU
Q9550 E0 @ 4.1Ghz
Motherboard
GA-EP45-UD3P
Memory
Mushkin 4GB
Graphics Card
EVGA GTX 295
Hard Drive
500Gb Seagate Barracuda
Sound Card
On-Bored
Power Supply
Antec True Power 1000w
Case
Antec Nine Hundred
CPU cooling
TRUE 120 Black
GPU cooling
STOCK BABY
OS
Windows 7 X64
Monitor
Acer G24
litho is offline   Reply With Quote
Old 11-22-08   #19 (permalink)
First Time Build
 
intel ati

Join Date: Oct 2008
Location: Atlanta, GA
Posts: 52

Rep: 0 totaleclipse82 Unknown
Unique Rep: 0
Trader Rating: 0
Default

Litho:
Its already in the mail! RMA was so easy and fast with newegg! Like you said, it might cause problems later on.

I will have some pictures of my build in a couple of days. I do not know what to do with all of the extra power cables coming from my PSU? Any ideas?

I also plan on making panty hose filters like Bradical did, and i will do the same for the bottom under the PSU vent.
__________________
System: Tha BandWagon?
CPU
Q9550 E0
Motherboard
ASUS Rampage Formula
Memory
4GB Corsair Dominator 1066
Graphics Card
Sapphire HD 4870 1GB
Hard Drive
WDCavBlack750GB 32MBCache
Power Supply
Corsair 750W ATX12V
Case
CM HAF 932
CPU cooling
Noctua NH-U12P
OS
Vista 64bit
Monitor
Wacom Cintiq 21UX
totaleclipse82 is offline   Reply With Quote
Old 11-28-08   #20 (permalink)
First Time Build
 
intel ati

Join Date: Oct 2008
Location: Atlanta, GA
Posts: 52

Rep: 0 totaleclipse82 Unknown
Unique Rep: 0
Trader Rating: 0
Default

Well i bought another 4870 while waiting on my other 4870 from Newegg. I have all the components installed.

When i turn on the computer for the first time it turns on then a few seconds later turns right back off, and then keeps trying to boot up. It seems that all of the fans, CPU fan, case fans, video card fan, and ram fans turn on.

Sometimes it takes longer to reboot, I see the BIOS screen flash on the monitor and it acts like it is going to boot up and then it turns off again. I even got a normal beep a couple of times before it restarted.

Any ideas?
__________________
System: Tha BandWagon?
CPU
Q9550 E0
Motherboard
ASUS Rampage Formula
Memory
4GB Corsair Dominator 1066
Graphics Card
Sapphire HD 4870 1GB
Hard Drive
WDCavBlack750GB 32MBCache
Power Supply
Corsair 750W ATX12V
Case
CM HAF 932
CPU cooling
Noctua NH-U12P
OS
Vista 64bit
Monitor
Wacom Cintiq 21UX

Last edited by totaleclipse82 : 11-28-08 at 07:21 PM
totaleclipse82 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools



All times are GMT -5. The time now is 12:26 PM.


Overclock.net is a Carbon Neutral Site Creative Commons License

Terms of Service / Forum Rules | Privacy Policy | DMCA Info | Advertising | Become an Official Vendor
Copyright © 2009 Shogun Interactive Development. Most rights reserved.
Page generated in 0.17000 seconds with 9 queries