E6550+p35 - fouro's build - Overclock.net

dafour · 04-04-09

Hi

First time i post over here and already some questions.First off al,the setup.

C2D E6550 @ 3.15Ghz atm,with a FSB of 450x7 on 1.23vcore NB voltage is stock
Gigabyte P35-DS3 rev 2.1
4096Kit OCZ Gold 1066mhz
Cpu cooled with Freezer 7 Pro

Some questions;
My NB temp idles at 40c and stressed 45c ,is this ok?
My goal is to hit the 3.33Ghz ,from 2333 to 3333 would be awesome...
So am i doing everything correct?
thx in advance

crashnburn_819 · 04-04-09

Read these:
http://www.overclock.net/intel-cpus/...ing-guide.html
http://www.overclock.net/intel-cpus/...rclocking.html

Mr_Nibbles · 04-04-09

Your NB temps are ok.

dafour · 04-06-09

After reading ive got it up to my goal.
Its now running 3333mhz with a vcore of 1.31 and MCH +0.1v,FSB +0.1v,rams at 2.11v
I'm getting a nice 15,600 sec Superpi 1M and my performance in GTAIV has gone up again.

Thanks for the very useful posts !!

dafour · 05-04-09

LOl I think the board died
Keep on rebooting....

Need another one,will the Asus P5QL-Pro get me back on 480FSB???

Ty

dcshoejake · 05-04-09

RMA

If you need a new board for a socket 775 and your goal is FSB anyone here will tell you to go with the Gigabyte UD3P.

dafour · 07-07-09

Well the board just wont die..

i'm having trouble with it,if i manually reset he boots twice and resets my overclock...its always the same...Cant reset or i have to setup everything...
Does someone has this problem too?Or are my settings incorrect?
Here are the bios settings.

Quote:

CPU = Model Core2Duo E6550
Motherboard = Model, Revision EP35-DS3 rev 2.1
BIOS Version = bios F14C
Ram = OCZ 4096kit 1066 (OCZ2G10664GK)

[code]Robust Graphics Booster___________ [Auto]
CPU Clock Ratio ____________ [7]
Fine Clock Ratio ____________dont have this
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [500]
PCI Express Frequency (Mhz)_______ [100]
C.I.A. 2__________________________ [Disabled]
System Memory Multiplier (SPD)____ [2.00]
DRAM Timing Selectable_______ SPD __ [Auto]

Performance Enhance = [Standard]

CAS Latency Time________________ 5
Dram RAS# to CAS# Delay_________ 6
Dram RAS# Precharge Delay______6
Precharge Delay (tRAS)__________ 18

ACT to ACT Delay (tRRD)_________ AUTO
Rank Write to READ Delay________ AUTO
Write to Precharge Delay_________ AUTO
Refresh to ACT Delay______________ AUTO
Read to Precharge Delay__________AUTO
Static tRead Value_______________AUTO
Static tRead Phase Adjust________ [Auto]

System Voltage Control____ [Manual]
DDR2 OverVoltage Control__ [+0.3V]
PCI-E OverVoltage Control_ [+0.0V]
FSB OverVoltage Control___ [+0.3V]
(G)MCH OverVoltage Control [+0.3V]
CPU Voltage Control_______ [1.45] 1.41

Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Disabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Enabled] Enabled if you use Vmware/Virtual PC

Integrated Peripherals
Legacy USB Storage Detect___________________[Enabled] *Note* Must be enabled to flash from USB

dafour · 07-08-09

No one?

sweet_3025 · 07-08-09

Take out the power cable, remove the bios battery and short the bios jumper to reset and leave it like this for 10 mins. This will hard reset the bios.

gothev · 07-08-09

Yep as the user said above. If it died get a GA EP45 UD3R or P. They are the best if you want to achieve a great overclock.

		Overclock.net - Overclocking.net > Intel > Intel - General > Intel Build Logs
E6550+p35 - fouro's build

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)