felix.vollrath

with that expensive system try harder with the cable management. it looks untidy. use the holes under the graphics cards.

__________________
I am 52% addicted to Counterstrike. What about you?

3D Modeller

There's nothing wrong with the cable management. In fact...you can't do better with that case. Only the small cables at the bottom are a little untidy.

The cables for the GFX cards are too bulky to bend in a tiny hole!



Will do. It'll take a while though.

__________________

felix.vollrath

there are two large holes rig next to the graphics card. why are you routing the wires through the top one. since the corsair 1000 hx cables are soft it should be easy to put them through there. Also the corsair fan cable is routed badly. there are a lot of small things that can be done better. the graphics cables are the major bad looking cables.

__________________
I am 52% addicted to Counterstrike. What about you?

3D Modeller

Ah I see what you're seeing. Well...because they bulk up too much behind. There's no point in it looking good on one side and being crap on the other. The case has issues closing when they're all bulked up.

I'll take that on board though...I see your point. I'll take a look at it

As for the corsair fan cable...that is the way it's made. It's nothing to do with bad routing. There is no other way to do it other than shortening the cable which I'd love to do but have no tools to crimp the plugs.

One thing I'll never do though is bend cable too much. It's BAD for them.

As for a 'lot of things that can be done better'. I have to disagree...you seem to be seeing other things that aren't there ?!?! Lots?

__________________

felix.vollrath

cpu cable can b done better,
one cable under the graphics card
can't you route the ram fan cable behind the mobo tray
as for the graphics put the thick graphics cable into the bottom card, route the bottom one's cable through the bottom directly to the psu, and the two thin one's from the modular parts (that are really thin) through the 2 holes.
it won't look bad and it will fit

__________________
I am 52% addicted to Counterstrike. What about you?

3D Modeller

Basically....1 thick cable instead of 3 separate ones is far better for airflow and turbulence. But I'll have a look at them coming out near each hole as I guess the split off will be the same.

But dude...you are picking on some of the funniest things I've heard recently. CPU one is funny and the little kink in one of the wires.

Who gives a **** basically!

__________________

felix.vollrath

cable management fanatics!!!
I have done a build with the same case and the same psu, only I had the rampage 2 extreme. and yes the modular thin cables are enough to power the main graphics and not just the slave ones. they are all 12v, which is more then enough.

__________________
I am 52% addicted to Counterstrike. What about you?

quakermaas

felix are you having a laugh or what ?
Giving out advise, after what you told us about you own computer in your last thread and all the pins you bent on the motherboard.

__________________
3dmarks06 24166 http://service.futuremark.com/compare?3dm06=10798348

felix.vollrath

well at least my cable management is AWESOME

__________________
I am 52% addicted to Counterstrike. What about you?

trogalicious

so post the pics back in the thread where you killed your computer and stop crapping on this thread. This guy, the OP, has an awesome machine and should be proud of it.

edit: I think we're all still waiting on you back in the other thread cookmast... I mean Felix.

__________________