|
![]() |
Overclock.net - Overclocking.net > Intel > Intel - General > Intel Build Logs | |
Hi! Can some1 plz check my setup?
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | |||||||||||
|
New to Overclock.net
|
Hey, and thanks for checking out my post. As you can see im new to this forum and im what you would call i n00b when it comes to OC'ing i guess
__________________I have read quite a few articles about it and have now tried my first OC setup. I have taken some screens and validation, so you can get all info you need ( i hope ) I would really appriciate if any of you more experienced then me, could take a look at the info ill post and give me some feedback. Is the setup ok, or what should i change to improve things.. Keep in mind that im a n00bie, so dont make to much fun of me, if the setups sucks. hehe ![]() (sorry if this is posted in wrong thread/forum) Specs: Asus P6T Deluxe V2. bios 0606. Cpu: i7-920 c0 @ 3.50ghz (stock cpu fan, keep that in mind when checking pics) Cpu fsb: 167 Multiplier: x21 Speedstep enabled, turbo disabled. Ram: 6gb 1600mhz DDR3 @ 1335mhz Gpu: XFX GTX 260 black edition(216) 896mb (gpu clock:720mhz/shader clock: 1600mhz/memory clock: 1200mhz) fan @ 75%, temps stable at approx 55C when gaming. Case: Antec Twelve Hundred with all fans running at full speed. Additional cooling: Indoor air condtion machine blowing directly at case 24/7 @ 16C Screenshot of cpu-z,coretemp,everest,prime95 after 2.5hours on torture mode, :: http://i19.photobucket.com/albums/b1...20_3_50ghz.jpg :: Cpu-z validation, :: http://valid.canardpc.com/show_oc.php?id=698178 :: Gpu-z validation, :: http://www.techpowerup.com/gpuz/d74wu/ ::
|
|||||||||||
|
|
|
|
|
#2 (permalink) | ||||||||||
|
4.0 GHz
|
Ok, there are two forums you would want to ask the question in. First would be the Intel CPU forum and 2nd would be Intel Motherboard Forum. They are on the site all you have to do is scroll down some. Tons of info in either of these.
Good Luck.
|
||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|