|
|
|
07-13-07
|
#41 (permalink) | |||||||||||
|
New to Overclock.net
|
Sorry hit enter by accident
__________________
Last edited by wouterspace : 07-13-07 at 06:22 AM Reason: Well I am clumsy at times |
|||||||||||
|
|
|
07-13-07
|
#42 (permalink) | |||||||||||
|
New to Overclock.net
|
Hi ...
__________________New here ... Ok I have an E2140 but had an E2160 (almost the same). On my 2160 I never got the FSB past 350. On my 2140 I can't get past 380 yet.  Things that I have tried: -FSB strap 333 doesn't work on my board might work on P35's -FSB strap 266 seems best for my set up -Pin mods for vcore currently useing the 1.4v one. -Pin mod for 1.55 vcore gives me 1.55 in bios 1.21 in anyother program Suspect for all this chaos is memory a friend managed to run FSB 425 with some different memory. I will try the same stix on the weekend. Any other suggestions are welcome. Just letting you know it isn't that easy to get to a 100% with these chips.
|
|||||||||||
|
|
|
|
07-13-07
|
#43 (permalink) | |||||||||||||
|
Intel Overclocker
 
|
Quote:
|
|||||||||||||
|
|
|
|
07-13-07
|
#44 (permalink) | |||||||||||||
|
Intel Overclocker
|
oh wow. i had no idea the E2140 did that well! i'm very impressed guys. Maybe i should get one of these lil guys with a cheap gigabyte board (ga-s3) and upgrade to the quad core after the x38 comes out
__________________ Q6600 G0 + X38... mmmm
|
|||||||||||||
|
|
|
07-15-07
|
#45 (permalink) | ||||||||||||
|
Commodore 64
|
hey guys, So far I've got my 2160 to 3005 (9x333) running a vcore of 1.4v idle 1.35v load after vdroop. Stable. I think I've got to take it slower from here as I did have it running at 3159 (9x350) but it needed alot more vcore
I may have to reseat my cooler too as I get idle temps of 31(speedfan cores) and 52-4 on load 34 case idle 37-8 case load. Ambient is some where around 24 Im in the basement but we got a little heat wave in the north. I think the Vdroop on this board is the real problem in limiting my OC its 0.075v from the bios to load. I see theres a pencil mod for the P5K vanilla but my boards is Slightly different. So heres me praying to the vmod gods
__________________
--"Dr. Chandra?....Will I dream? -hal 9000
|
||||||||||||
|
|
|
|
07-16-07
|
#46 (permalink) | ||||||||||||
|
Intel Overclocker
|
Thanks for posting
 If anyone wishes to share his/her's e2160 OC is gladly welcome
|
||||||||||||
|
|
|
|
07-16-07
|
#47 (permalink) | |||||||||||
|
New to Overclock.net
|
Yeah, I also thought temperatures would be the problem but ...
__________________With Icewater running trough a homemade waterblock it still wont do 381  It's a really though FSBwall and I can't break it. Let me know what I could try, Friday I am going to OC contest with this thing and I am not very confident. 
|
|||||||||||
|
|
|
|
07-17-07
|
#48 (permalink) | ||||||||||||
|
Commodore 64
|
Up, Up, Up, and still going up
__________________
--"Dr. Chandra?....Will I dream? -hal 9000
|
||||||||||||
|
|
|
|
07-17-07
|
#49 (permalink) | ||||||||||||
|
Intel Overclocker
|
Way to go
, I am buying really soon my components and I will post my OC as well really soon 
|
||||||||||||
|
|
|
|
07-17-07
|
#50 (permalink) | |||||||||||||
|
New to Overclock.net
|
New results :
__________________ had to up the voltage a tad bit. ran prime 95 stable for 5 hours 55 minutes until I stopped it. Temp was in the high 40s. Plenty stable for me, no BSODs ever. Will obviously try for more =) Not bad for a chip that starts at 1.8ghz eh? damn pic came out somewhat squished...3.2ghz@1.392v (set to 1.43 or so in BIOS)
|
|||||||||||||
|
|
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
