CPU Volt on 680iA1 Q6600 G0 - Page 3 - Overclock.net

**grunion** · 08-24-07

Quote:

Originally Posted by Arkidas

I don't understand though, Ain't I supposed to pump the FSB clock ( that is 1066 at default ) to increase the core clock of the CPU? I can't see what you mean by raising it to 333, unless you mean 1333?

You wanna raise the actual FSB which by default is 266x4( Quad pumped)which gives you a rated FSB of 1066. So your 266 actual fsb x 9 multi gives you 2400mhz cpu speed.
333x9 will give you 3000mhz cpu speed at a rated fsb of 1333.

Arkidas · 08-24-07

Quote:

Originally Posted by Coma

You'll get nothing but trouble if you try to skip it.. you're also just asking people here to tell you what to do, and well, if you'd been reading for just a little while, you'll see that every CPU is a little different.

You should fine tune it on your own.. don't ask other people to do it for you.

Anyway, other people have said that you should only run 1.5v at your own risk.. and also, why do you want to go straight to the max voltage?

Why not? I already asked about that and was told that it wont change a thing to set it to the max volt before clocking. Of course, you can get more out of each volt setting by testing it individually, but it is not necessary if you have determined the maximum volts you'll be using. Grunion told me in his post to raise the FSB to 333, I'm simply asking for further explanation. Of course I ask a lot, I'm a newbie at overclocking that is trying to learn fast, the fastest way to learn something is with help from experienced people. Usually I try to learn on my own but it is quite risky in this case. Sorry to be annoying you with the masses of posts, but it will be over once I get a hold of this technique.

Quote:

Originally Posted by grunion

You wanna raise the actual FSB which by default is 266x4( Quad pumped)which gives you a rated FSB of 1066. So your 266 actual fsb x 9 multi gives you 2400mhz cpu speed.
333x9 will give you 3000mhz cpu speed at a rated fsb of 1333.

Does that mean I should pump it to 1333 or is there another setting, just to get this clear.

**grunion** · 08-24-07

Quote:

Originally Posted by Arkidas

Why not? I already asked about that and was told that it wont change a thing to set it to the max volt before clocking. Of course, you can get more out of each volt setting by testing it individually, but it is not necessary if you have determined the maximum volts you'll be using. Grunion told me in his post to raise the FSB to 333, I'm simply asking for further explanation. Of course I ask a lot, I'm a newbie at overclocking that is trying to learn fast, the fastest way to learn something is with help from experienced people. Usually I try to learn on my own but it is quite risky in this case. Sorry to be annoying you with the masses of posts, but it will be over once I get a hold of this technique.

Does that mean I should pump it to 1333 or is there another setting, just to get this clear.

Yes

Arkidas · 08-24-07

Ok, stress test running. Temps a little below 60 now. If the CPU goes much over 60, should I stop the test and change something?

Volts:
CPU: 1.45
Memory ( not ocing ): 1.85
FSB: 1.4
HT ( SPP-MCP ): 1.2
PCI-E: 1.5
nForce: 1.5
AUX: 1.5

**grunion** · 08-24-07

Quote:

Originally Posted by Arkidas

Ok, stress test running. Temps a little below 60 now. If the CPU goes much over 60, should I stop the test and change something?

Volts:
CPU: 1.45
Memory ( not ocing ): 1.85
FSB: 1.4
HT ( SPP-MCP ): 1.2
PCI-E: 1.5
nForce: 1.5
AUX: 1.5

Are you at 3000mhz cpu speed?
You should be able to run 3.0 with a 1.3 vcore, should.

Arkidas · 08-24-07

Yes, 3.0. Should I stop the test and lower to 1.3? Lets not forget the vdrop.

**grunion** · 08-24-07

Quote:

Originally Posted by Arkidas

Yes, 3.0. Should I stop the test and lower to 1.3? Lets not forget the vdrop.

Yeah I'd try, you're at 1.45 now and I can almost guarantee you don't need that much.

Arkidas · 08-24-07

Should I leave the FSB at 1.4 though?

Treatment X · 08-24-07

I'm on water though.

CORRECT that VDROOP!
http://www.ocforums.com/showthread.php?t=524283

Credit goes to SYMPY from XS.

**grunion** · 08-24-07

Quote:

Originally Posted by Arkidas

Should I leave the FSB at 1.4 though?

Yes

Quote:

Originally Posted by Treatment X

I'm on water though.

CORRECT that VDROOP!
http://www.ocforums.com/showthread.php?t=524283

Credit goes to SYMPY from XS.

Nice OC, but that doesn't help here.

		Overclock.net - Overclocking.net > Intel > Intel CPUs
CPU Volt on 680iA1 Q6600 G0

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)