Does your E21x0 have a FSB wall? - Page 11 - Overclock.net

stumped · 02-22-08

My e2180 is at 3GHz stable, with VID of 1.3125 and right now at 1.92v (I'm gonna try to go lower, but the vdroop is horrible)
When I get time (this afternoon) I will post my batch number and everything

Flower · 02-22-08

Quote:

Originally Posted by stumped

My e2180 is at 3GHz stable, with VID of 3.125 and right now at 3.92v (I'm gonna try to go lower, but the vdroop is horrible)
When I get time (this afternoon) I will post my batch number and everything

3.125V???

stumped · 02-22-08

yes 3.125v!

**CL3P20** · 02-22-08

ROFL...thats sick. Almost 4v

I know its a typo..but still made me laugh. I thought the 1`st post was funny..but then to post again and argue..

lol

stumped · 02-22-08

wow, I feel smart. I hate my typing. I always type stuff backwards. And it took me 5 minutes to realize what I did.

whe3ls · 02-22-08

wow.... try setting vcore to 1.5 and set fsb at 360 and see if you can boot

whe3ls · 02-26-08

ok i am so getting rid of this chip it runs way.... to hot almost 60c at 3.4 with 1.45ish vcore and it takes way to much volt to get 3.6 stable. 1.56 and it crashed orthos after 15seconds

Flower · 02-26-08

Quote:

Originally Posted by whe3ls

ok i am so getting rid of this chip it runs way.... to hot almost 60c at 3.4 with 1.45ish vcore and it takes way to much volt to get 3.6 stable. 1.56 and it crashed orthos after 15seconds

What coretemp are you using?

whe3ls · 02-26-08

.96 and speed fan showed the same temps. i think the temps are right as i have seen M0 run very hot

Flower · 02-26-08

Quote:

Originally Posted by whe3ls

.96 and speed fan showed the same temps. i think the temps are right as i have seen M0 run very hot

I was talking about this in another thread, it's not that I don't believe it but I am still a bit unshure. I was told that 0.96 was the one to use, not 96.1 because it had Tj. max of 85 (so lower temps). What are you loading at?

02-22-08	#106 (permalink)
whe3ls goad ting i r dislekxic Join Date: Feb 2007 Location: spokane washington Posts: 15,869 Rep: 825 Unique Rep: 543 Trader Rating: 59	wow.... try setting vcore to 1.5 and set fsb at 360 and see if you can boot __________________ Total Posts: 666 (6.66 posts per day) Private Messages: Unread 0, Total 666. Project:Fishy updated: 5/10/09 best thread ever washington state overclockers the 450 dollars folding rig that will amaze you does your E21x0 have a fsb wall E6600@4.005ghz Q6600@4.005ghz click me 892/2000 spent

02-26-08	#107 (permalink)
whe3ls goad ting i r dislekxic Join Date: Feb 2007 Location: spokane washington Posts: 15,869 Rep: 825 Unique Rep: 543 Trader Rating: 59	ok i am so getting rid of this chip it runs way.... to hot almost 60c at 3.4 with 1.45ish vcore and it takes way to much volt to get 3.6 stable. 1.56 and it crashed orthos after 15seconds __________________ Total Posts: 666 (6.66 posts per day) Private Messages: Unread 0, Total 666. Project:Fishy updated: 5/10/09 best thread ever washington state overclockers the 450 dollars folding rig that will amaze you does your E21x0 have a fsb wall E6600@4.005ghz Q6600@4.005ghz click me 892/2000 spent

02-26-08	#109 (permalink)
whe3ls goad ting i r dislekxic Join Date: Feb 2007 Location: spokane washington Posts: 15,869 Rep: 825 Unique Rep: 543 Trader Rating: 59	.96 and speed fan showed the same temps. i think the temps are right as i have seen M0 run very hot __________________ Total Posts: 666 (6.66 posts per day) Private Messages: Unread 0, Total 666. Project:Fishy updated: 5/10/09 best thread ever washington state overclockers the 450 dollars folding rig that will amaze you does your E21x0 have a fsb wall E6600@4.005ghz Q6600@4.005ghz click me 892/2000 spent

		Overclock.net - Overclocking.net > Intel > Intel CPUs
Does your E21x0 have a FSB wall?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)