whe3ls

69c at 3.6 just before orthos bluescreens

__________________

for sale thread

Flower

Ok I doubt you'll be using that 24/7 then. I was a bit troubled to find that out because the 96.1 states pretty much the same temps as other programs (on which I based my OC) whereas the 96 indicates that I have been running in the 70°C area

__________________

whe3ls

no i am going to be selling it off local along with my 3600 and m2r32-mvp and geting either a x3210 or a e8400

__________________

for sale thread

Blameless

I have two M0 E2140s

The first one has an FSB wall at 380MHz.

The one in my sig has a wall at 420MHz.

Can't give ya the steppings cause I forgot to write them down before I sanded them off.

whe3ls

do you have the boxes?

__________________

for sale thread

TheWire

2180: Well, so far 400FSB but run at 300FSB as the voltage/heat between 200Mhz is crazy. I think that I could push this chip way further on this mobo ONLY with decent chipset cooling. NB is already at 66C but my chipset runs hot anyway. My home made crappo NB active cooling soloution makes next to no difference and certainly not enough for me to up the chipset voltage(which IMO would buy me more FSB).

The FPO#: Q737A381.

I would love to know the highest anyone has managed to get this chip running with the P5N32-E Sli. I have a theory that this mobo will OC any compatible CPU as well as anything else after the voltage issues have been straigtened out and the chipset/mosfets are cooled down(a lot...).

Anyone have tried this?

__________________
Riding the datastorm,
On an adrenalin high,
Since 1975.

whe3ls

you could get a hr 05 there pretty cheap anymore

__________________

for sale thread

deadly12

hmm i have tried running my 2140 at over 465 ,, boots, can see the cpuz also run orthos but for only about 20 secs. then bsod or fail probably high temps. idle at 55+ couldnt chk loads

CL3P20

If you have a stock intel cooler.. you can use the fan from it to cool your NB. they have pretty good output.

__________________
CL3P20's Folding stats

Playing Koi- My Ink-Log
My photo albums

build log->780i DICE rig: 780i, Patriot SSD- pending, ViperJohn's SPP block, cas3 Dom's, Element 600W, 80GB 'Cudda', MCP355

nategr8ns

You should make another table for FSB holes, where it won't be stable at a certain FSB, say 350-365, but when you set it to 380 its stable.

__________________