demoship

I HAD to undervolt from stock voltage to overclock, otherwise the CPU would overheat.

3.0 @ 1.275 (bios), 1.224 (both cores 100% load)

I tried 1.225 (bios), wasn't stable, so i added .05v and it was.

At the current undervolting, the CPU runs @ 60c load, w/o the undervolt it'd probably like 75.

JeremyFr

I've currently got my E4400 at 2.8Ghz @ 1.225 volts and it couldn't be happier.

__________________
Intel Overclocker and Networking/Telecomm GURU.

#10 for fastest download on OCN!! 34Mbps baby!!

http://www.overclock.net/networking-...iscussion.html

afzsom

Thank you sir!

__________________
Watercooling Loop: MCP655 Vario -> Black Ice GTX360 -> Stinger Diamond Max -> Heatkiller GPU-X² -> MicroRes

Best. Thread. Ever. || C1E/EIST/SpeedStep Fix || Undervolt and Overclock your CPU! || GPU-Z Benchmark Settings || GPU-Z Stock Settings || Lian Li Owner's Showcase || Lian Li Group

skinny101

My E6550 (2.33Ghz) can be undervolted to 1.0v and probably lower if i tried when it is at stock speeds. Right now it is at 3.41Ghz and it's voltage is at 1.300v and stock is 1.325, it's definitely possible lol.

Great thread btw +rep

stunod1

Thank you, for taking the time to do this, I'm sure that this helped a lot of people. Although I'm not one of them, I am unable to read the file format created by MS in their quest for a monopoly. If you can, someday perhaps, you could put this file in html or pdf format the humble masses could then benefit from your hours of toil. Sincere thanks again

dr4gon

Wow, just found this from your sig. Looks like I'm running my quad coincidently at about the right point with a little bit of headroom (since you tested an e6600)

+rep for you man! Good work

__________________
Project: Orange Box Uni-Sleeving your 24-pin PSU Guide
Join the New OCN Flickr Group - My Flickr
>>> For Sale: <<<
Team Fortress 2 - Add OCN @ 68.232.173.130:27015 / 8.12.68.58:27015 to your favorites.

MasterKromm

Nice work, I searched before posting my thread but not much came up resembling my search terms(undervolted overclocked)... Though if I had used undervolt and overclock I would have found your thread. My bad.

What do you guys think continue running P95 or lower the voltage even more?

-EDIT-

Ah crap forgot to include CPU-Z in the SS, it's @ 1.136 currently...

-EDIT- #2

Added a SS with CPU-Z...

__________________

afzsom

Well CoreTemp only shows your voltage ID, not the current voltage. Open CPU-Z to show us what your load voltage is.

__________________
Watercooling Loop: MCP655 Vario -> Black Ice GTX360 -> Stinger Diamond Max -> Heatkiller GPU-X² -> MicroRes

Best. Thread. Ever. || C1E/EIST/SpeedStep Fix || Undervolt and Overclock your CPU! || GPU-Z Benchmark Settings || GPU-Z Stock Settings || Lian Li Owner's Showcase || Lian Li Group

Mikemoon07

mine runs at 3.6 with 1.43 after droop
preety nice id say :]

__________________

Q6600 B3 @ 3.6/1.43Vcore CPUZ Verified

http://valid.x86-secret.com/show_oc.php?id=324175
Q6600 G0 @ 3.71/1.52 Cpu-z
http://valid.canardpc.com/show_oc.php?id=528741

afzsom

I'd say 3.0GHz with anything less than 1.2v is quite a feat...see if you can drop below 1.1v

__________________
Watercooling Loop: MCP655 Vario -> Black Ice GTX360 -> Stinger Diamond Max -> Heatkiller GPU-X² -> MicroRes

Best. Thread. Ever. || C1E/EIST/SpeedStep Fix || Undervolt and Overclock your CPU! || GPU-Z Benchmark Settings || GPU-Z Stock Settings || Lian Li Owner's Showcase || Lian Li Group