The Stable E1000/E2000 Rigs Configuration Thread

[Ben the OCer]

Originally Posted by ncsa

UserName. ncsa
CPU. Processor name – E2140
Batch #. Q732A252
Cooling. VapoChill LS [AC] Single Stage
Chipset. P35
Mobo. Abit IP35-Pro
BIOS. 12.B1
FSB. 455
M. FSB. The Maximum FSB you had tried. 465x8
Multi. CPU multiplier. 8
CPSD. 3720 MHz
Ram SPD. 1092 : 5:6
Ram TM. 4-4-4-8
DDRV. 2.425
NBV. 1.47
SBV. 1.12
CoreV. 1.65
Idle Temp: -37C
Load Temp: -18C

Bench Results

Wow that's a sweet OC! Is that an M0 E2140? Just like lins said, I would rep you if I could.

[Bear]

yes it is a m0..... very very very nice overclock, great job ncsa

[Avalanche]

UserName. Avalanche
CPU. E2180
C/S. M0
Batch #.
Cooling. Coolermaster HyperTX
Chipset. P35
Mobo. GA-P35-DS3
BIOS. F6
FSB. 300
M. FSB.
Multi. 10
CPSD. 3000mhz
Ram SPD. 900mhz
Ram TM. 5-5-5-12
DDRV. 1.9V
NBV. 1.6V
SBV. stock
CoreV. 1.25V
VID. 1.3V
Idle Temp: 32/32
Load Temp: 54/54
Comments: This is still work in progress

[linskingdom]

Originally Posted by Avalanche

UserName. Avalanche
CPU. E2180
C/S. M0
Batch #.
Cooling. Coolermaster HyperTX
Chipset. P35
Mobo. GA-P35-DS3
BIOS. F6
FSB. 300
M. FSB.
Multi. 10
CPSD. 3000mhz
Ram SPD. 900mhz
Ram TM. 5-5-5-12
DDRV. 1.9V
NBV. 1.6V
SBV. stock
CoreV. 1.25V
VID. 1.3V
Idle Temp: 32/32
Load Temp: 54/54
Comments: This is still work in progress

Avalanche, Sorry for the daley. I had updated the list with your information. I very appreciate your efforts. Hope you can push higher.

[gridstop]

Hunting for my max OC on my 2160 L2, but noticing some weird temps.

I have a Hyper TX2 like Avalanche there, and am also running at 3.0ghz at the moment. I cleaned & reseated the HSF w/ AS5 after initial temps were very bad, I also replaced the intel pushpins w/ a backplate. (VERY nice).

I had to give mine a little voltage bump so it would stay at about 1.29v under load (vdroop is bad on P5K).

Temps are 33c idle, but load temps vary. Orthos blend is around 59-61C. Orthos small FFT is about 65-66, and Intel TAT will hit 70C if I let it go. Also, at idle TAT reports temps about 2C hotter than Coretemp, at load TAT reports temps about 2C cooler than Coretemp.

If anyone has advice interpreting these temps on a E21x0 I'd appreciate it so I know what to look to next. I'm worried about going higher right now, already had one BSOD in TAT after hitting 73C (before reseating).

[Sir Humpsalot]

I'm at 3000 MHz, I think I am stable, but have not yet done any testing whatsoever. Lins, do you want my system specs and details now? Or once I've confirmed that I'm stable and happy? FWIW, I do intend to push this OC a little farther...

[linskingdom]

Originally Posted by gridstop

Hunting for my max OC on my 2160 L2, but noticing some weird temps.

I have a Hyper TX2 like Avalanche there, and am also running at 3.0ghz at the moment. I cleaned & reseated the HSF w/ AS5 after initial temps were very bad, I also replaced the intel pushpins w/ a backplate. (VERY nice).

I had to give mine a little voltage bump so it would stay at about 1.29v under load (vdroop is bad on P5K).

Temps are 33c idle, but load temps vary. Orthos blend is around 59-61C. Orthos small FFT is about 65-66, and Intel TAT will hit 70C if I let it go. Also, at idle TAT reports temps about 2C hotter than Coretemp, at load TAT reports temps about 2C cooler than Coretemp.

If anyone has advice interpreting these temps on a E21x0 I'd appreciate it so I know what to look to next. I'm worried about going higher right now, already had one BSOD in TAT after hitting 73C (before reseating).

Gridstop, see if you can fill the specs so we are bale to help you. The difference between the idle and load temp is huge in this case so it seems like the contact of HS isn’t that well.

[linskingdom]

Originally Posted by Sir Humpsalot

I'm at 3000 MHz, I think I am stable, but have not yet done any testing whatsoever. Lins, do you want my system specs and details now? Or once I've confirmed that I'm stable and happy? FWIW, I do intend to push this OC a little farther...

Sir Humpsalot, go ahead to do some stress tests or see if you can push higher. Watch out the temp. You can post your configuration here once you confirme the rig is stable. Thanks for the update. Would like to hear from you soon.

[gridstop]

Originally Posted by linskingdom

Gridstop, see if you can fill the specs so we are bale to help you. The difference between the idle and load temp is huge in this case so it seems like the contact of HS isn’t that well.

* UserName. gridstop
* CPU. E2160
* C/S. L2
* Batch #. Q714A630
* Cooling. Air. CM HyperTX2 w/ TT LGA775 backplate kit added
* Chipset. P35
* Mobo. Asus P5K Vanilla
* BIOS. 0414
* FSB. 333
* M. FSB. Waiting to lower temps first.
* Multi. 9
* CPSD. 3000
* Ram SPD. 800mhz
* Ram TM. 5-5-5-15 (for testing, will do 4-4-4 at least)
* DDRV. 2.1v
* NBV. Stock
* SBV. Stock
* CoreV. 1.3625 set in Bios, 1.29 via CPU-Z under load
* VID. 1.3250
* Idle Temp: 35/32
* Load Temp: 60/60 and 68/68 for Blend/Small FFT
* Comments: TAT hits 70c!

[linskingdom]

Originally Posted by gridstop

* UserName. gridstop
* CPU. E2160
* C/S. L2
* Batch #. Q714A630
* Cooling. Air. CM HyperTX2 w/ TT LGA775 backplate kit added
* Chipset. P35
* Mobo. Asus P5K Vanilla
* BIOS. 0414
* FSB. 333
* M. FSB. Waiting to lower temps first.
* Multi. 9
* CPSD. 3000
* Ram SPD. 800mhz
* Ram TM. 5-5-5-15 (for testing, will do 4-4-4 at least)
* DDRV. 2.1v
* NBV. Stock
* SBV. Stock
* CoreV. 1.3625 set in Bios, 1.29 via CPU-Z under load
* VID. 1.3250
* Idle Temp: 35/32
* Load Temp: 60/60 and 68/68 for Blend/Small FFT
* Comments: TAT hits 70c!

gridstop, Thanks for your information. I very appreciate your supports. I am going to update the list now. Please feel free to reply this if you have any lastest information and I will update it for you.