The Stable E1000/E2000 Rigs Configuration Thread

[linskingdom]

Originally Posted by cecico135

* UserName. cecico135
* CPU. Processor name - E2160
* C/S. CPU Stepping.
* Batch #.
* Cooling. Air - Stock
* Chipset. P35
* Mobo. ABIT IP35
* BIOS.
* FSB. 401
* M. FSB. 401
* Multi. 9
* CPSD. 3609MHz
* Ram SPD. 400Mhz. 4:5
* Ram TM. Memory timing. 4-4-4-12
* DDRV. DDR voltage. 2.5V
* NBV. NorthBridge voltage.
* SBV. SouthBridge voltage.
* CoreV. CPU voltage. 1.55V
* VID.
* Idle Temp: 50
* Load Temp: 65-70
* Comments:
http://valid.x86-secret.com/show_oc.php?id=262266

My congratulation on your 100% OC. cecico135. Very nice. Glad that you like the Abit board. I will update your information as soon as I get a chance. See your PM for some suggestions on L2 temp, cooler and stress tests.

[JackMcIntyre]

Originally Posted by cecico135

* UserName. cecico135
* CPU. Processor name - E2160
* C/S. CPU Stepping.
* Batch #.
* Cooling. Air - Stock
* Chipset. P35
* Mobo. ABIT IP35
* BIOS.
* FSB. 401
* M. FSB. 401
* Multi. 9
* CPSD. 3609MHz
* Ram SPD. 400Mhz. 4:5
* Ram TM. Memory timing. 4-4-4-12
* DDRV. DDR voltage. 2.5V
* NBV. NorthBridge voltage.
* SBV. SouthBridge voltage.
* CoreV. CPU voltage. 1.55V
* VID.
* Idle Temp: 50
* Load Temp: 65-70
* Comments:
http://valid.x86-secret.com/show_oc.php?id=262266

Very nice clock! How do you maintain those temperatures on stock cooling? I'm hitting around 61 at full load at 2.4GHz!

[cecico135]

Here my desktop

[breakfromyou]

* UserName. breakfromyou
* CPU. Processor name - E2140,
* C/S. CPU Stepping. M0
* Batch #. Q727A052
* Cooling. Air
* Chipset. P35
* Mobo. DFI LANparty UT P35-T2R
* BIOS. 9/23
* FSB. 400 MHz
* M. FSB. 450 MHz.
* Multi. CPU multiplier. 8.
* CPSD. CPU clock speed. 3.2 GHz
* Ram SPD. Memory speed. CPU : SPD=400MHz, 4-4-4-12, 2.2v, 500 MHz, 4:5
* Ram TM. Memory timing. 4-4-4-10.
* DDRV. DDR voltage. 2.27 set in BIOS. Software reads 2.22.
* NBV. NorthBridge voltage. 1.45v
* SBV. SouthBridge voltage. ??? 1.75v SB Core/CPU PLL? 1.070v for SB 1.05v
* CoreV. CPU voltage. 1.325v (stock)
* VID. 1.3250v
* Idle Temp: 22c/24c
* Load Temp: 50/51
* Comments: I want 3.2+.

I had to bump the CPU VTT and the CPU PLL up a hair to get it to do 5 hours (where it crashed) in orthos. 5 hours is good enough, right?? :x

EDIT: It's a little warmer in my room than usual. I'll keep updating the temps It didn't break 48c the other day!

[linskingdom]

Originally Posted by breakfromyou

* UserName. breakfromyou
* CPU. Processor name - E2140,
* C/S. CPU Stepping. M0
* Batch #. Q727A052
* Cooling. Air
* Chipset. P35
* Mobo. DFI LANparty UT P35-T2R
* BIOS. 9/23
* FSB. 400 MHz
* M. FSB. 450 MHz.
* Multi. CPU multiplier. 8.
* CPSD. CPU clock speed. 3.2 GHz
* Ram SPD. Memory speed. CPU : SPD=400MHz, 4-4-4-12, 2.2v, 500 MHz, 4:5
* Ram TM. Memory timing. 4-4-4-10.
* DDRV. DDR voltage. 2.27 set in BIOS. Software reads 2.22.
* NBV. NorthBridge voltage. 1.45v
* SBV. SouthBridge voltage. ??? 1.75v SB Core/CPU PLL? 1.070v for SB 1.05v
* CoreV. CPU voltage. 1.325v (stock)
* VID. 1.3250v
* Idle Temp: 22c/24c
* Load Temp: 50/51
* Comments: I want 3.2+.

I had to bump the CPU VTT and the CPU PLL up a hair to get it to do 5 hours (where it crashed) in orthos. 5 hours is good enough, right?? :x

EDIT: It's a little warmer in my room than usual. I'll keep updating the temps It didn't break 48c the other day!

Wow. 100% OC. Good works. With low voltage and temp. More hours for stress test are always good to ensure it won't damage components. You have M0 processor that has 72c max so you still have a bit room to go. If you want to 3.2G+ (that 100%+ OC), record the curren BIOS settings, try to increase vcore, NB or SB a bit. Change one thing at one time so you know what was wrong when it failed. Watch your temp.

I am going to update the list now. Thanks for your information.

[Trippen Out]

why is that only one person has used the 8x with the e2180.. if your not able to max out this chip at least max out your FSB

[mogators]

Trippen, I am doing some experimenting with my E2180 right now. I actually went all the way down to 6X with a 350FSB and it worked. I then tried 8x, worked again. Same for 9x. I tried 350x10, but couldn't get it to boot. Still working on voltages though. I tried cpu @ 1.525v, ddr2 @2.0V, NB@1.37v. 350x9 is working at 1.505v on vcore and 1.33v for NB. Anyone know what the CPU GTLREF setting does on the IP35-E board? I haven't played with that yet.

[NCspecV81]

i use 8x multi on my e2180. utilize 400fsb so I can run 1 to 1 ram at ddr2-800 speeds and keeps the cpu at 3.2ghz with 1.37v on load to pass occt/orthos. However, I'm loving the everest read speed benches! at ddr2-800 speeds with those settings on the e2180 its getting around 10,4xx mb/s on memory read.

[Rick Arter]

Originally Posted by NCspecV81

i use 8x multi on my e2180. utilize 400fsb so I can run 1 to 1 ram at ddr2-800 speeds and keeps the cpu at 3.2ghz with 1.37v on load to pass occt/orthos. However, I'm loving the everest read speed benches! at ddr2-800 speeds with those settings on the e2180 its getting around 10,4xx mb/s on memory read.

Looks awesome need to drop the multi on mine to find the wall and up the multi after that 1GHz overclock is goal at least on stock cooler. Never runs hotter then 60c at the below specs but not fully stable don't think yet.

[leastbay]

Leastbay
E2180
MO stepping
batch: q721a354
Tuniq Tower
775 chipset
Abit IP35-E
bios version 13
fsb 340
10x
3400mhz
ram spd 680mhz
timing 5-5-5-5
DDRv 2.2
NBv 1.41
SBv 1.55v
CoreV 1.525
VID 1.325
idle temp 41
load temp 68

could push it further but not with the side of the case on, I will have to add more fans to pump more air in. Also going to reseat the Tuniq with shin Etsu this week and see if I can drop it a little.