The Stable E1000/E2000 Rigs Configuration Thread

[linskingdom]

Norse and Robbie. Updated. It should show up soon. Thanks.

[Blameless]

Blameless
Pentium E2140
M0
unknown batch
Air (Zalman 7700Cu)
Intel P35
DFI Blood Iron P35-T2RL
12/24/2007 BIOS
400MHz fsb stable
420MHz wall
8x
3200MHz stable
4:5 ratio (500MHz memory)
4-4-4-10-T2
2.16v ddr
1.61v NB
1.25v VTT
1.376v cpu core (after droop)
VID - 1.3v
30C idle
70C load (S&M 1.9.1 FPU test)

Comments: load temps seem high, but the CPU is very stable. Prime95 v25.6 small FTTs gets the temp to 67C according to coretemp. I've been running these speeds for about 4 months without a problem. Passes 72 hours prime95.

Super PI 1M - 18.484 seconds.

[linskingdom]

Blameless. Nice 100% OC. Updated. Thanks.

[Chipp]

Hi again Linskingdom. New motherboard brought about a few changes, though I'm still trying to improve the overclock. 3600mhz is my ultimate goal, though I've yet to coax Windows into booting at that speed.

Chipp
E2160
L2
Q702A950
Air (Ultra90)
P35
ABIT IP35-E
v15
333mhz
9x
3000MHz stable
2:3 (500MHz memory)
5-5-5-15 2T
1.9vdimm
default NB
1.25v VTT
1.325v vcore core BIOS (1.277v after droop)
VID - 1.325v
43C idle
75C load (Orthos Blend)

[linskingdom]

Originally Posted by Chipp

Hi again Linskingdom. New motherboard brought about a few changes, though I'm still trying to improve the overclock. 3600mhz is my ultimate goal, though I've yet to coax Windows into booting at that speed.

Chipp
E2160
L2
Q702A950
Air (Ultra90)
P35
ABIT IP35-E
v15
333mhz
9x
3000MHz stable
2:3 (500MHz memory)
5-5-5-15 2T
1.9vdimm
default NB
1.25v VTT
1.325v vcore core BIOS (1.277v after droop)
VID - 1.325v
43C idle
75C load (Orthos Blend)

Thanks the update.Chipp. I will update the list as soon as I get a chance.

[Ben the OCer]

Originally Posted by Blameless

Blameless
Pentium E2140
M0
unknown batch
Air (Zalman 7700Cu)
Intel P35
DFI Blood Iron P35-T2RL
12/24/2007 BIOS
400MHz fsb stable
420MHz wall
8x
3200MHz stable
4:5 ratio (500MHz memory)
4-4-4-10-T2
2.16v ddr
1.61v NB
1.25v VTT
1.376v cpu core (after droop)
VID - 1.3v
30C idle
70C load (S&M 1.9.1 FPU test)

Comments: load temps seem high, but the CPU is very stable. Prime95 v25.6 small FTTs gets the temp to 67C according to coretemp. I've been running these speeds for about 4 months without a problem. Passes 72 hours prime95.

Super PI 1M - 18.484 seconds.

Nice OC and Super PI 1M time. For kicks I thought I would run Super PI to see how my system compares to your's and shockingly I got the same exact time (on the first try too). It was done with my E2140 @ 3.21GHz 1.3V and my Crucial Ballstix RAM @ 802MHz 4-3-3-8 1T 2.1V. I tried to validate it at xtremesystems.org (so you guys wouldn't be like sure you got the same time, you must have used Photoshop) but it didn't work (I don't think I've ever got it to work). Does anybody know if the time has to be submitted somehow first?

[Chipp]

http://valid.x86-secret.com/show_oc.php?id=325726

Stable at 3400, now. (Thanks for the advice via PM, Lins!)

Changes:
FSB: 378
vcore: 1.41v
ICH: 1.61
MCH: 1.39

[linskingdom]

wow. Almost 90% OC. Good work. Chipp. Updated. Thanks.

[PizzaMan]

Recently upgraded some components. Bought new CoolerMaster heatsink for CPU and a Corsair PSU, but I seem to be stuck at 3.0Ghz. I'm running 51c during test.

FSB: 1200
Multi: x10
Vcore: 1.42

Everything else on defualt settings. I tried increasing Vcore, NB and SB volts, and VTT. I should be able to go higher with these kind of temps, but it doesn't even post @ 1240. :/

Any suggestions?

[Pasha1234]

Hello every1 This is my system

UserName: Pasha1234
Cooling: Freezer 7 pro
Chipset: P35
Mobo: Asus P5K
BIOS: 0902
FBS: 320
Max FSB:
Multi :9
CPSD 2880
Ram SPD 4:5
Ram TM 4-4-4-12
DDRV: 1.90v
NB: 1.40
CoreV: 1.40
Idle Temp 28/30
Load Temp: 52/52