The Stable E1000/E2000 Rigs Configuration Thread

[linskingdom]

Originally Posted by Dezixn

I got two rigs going now with 965P-DS3's, E2180's, 2x1gb 80MHz and 8800 GTS 320's.

One gets to 3.1GHz the other to 3.3GHz. the 3.1GHz requires way more voltage but runs cooler, while the 3.3GHz requires less but runs hotter...

With the GTS overclocked the 3.3GHz gets 10,550 in 3dmark06 and the 3.1GHz gets about 10,400.

I'm pretty impressed.

I'll do a full write up later, they are still stress testing. I just thought I would chime in with this.

Thanks for the update. Dezixn. If I log out at that time then I will udpate tomorrow as soon as possible. It is kids' bed story time.

[Dezixn]

Originally Posted by linskingdom

Thanks for the update. Dezixn. If I log out at that time then I will udpate tomorrow as soon as possible. It is kids' bed story time.

They are stress testing overnight, so no worries. No official update until tomorrow.

Mrs. Marks my crazy **** of an English teacher gave us a ton of crap to do, so I couldn't do it now even if i wanted to.

I hate her...

[linskingdom]

Originally Posted by Dezixn

They are stress testing overnight, so no worries. No official update until tomorrow.

Mrs. Marks my crazy **** of an English teacher gave us a ton of crap to do, so I couldn't do it now even if i wanted to.

I hate her...

Haha. Understand. We'd been there. I wish I have few days off and just do OC stuff.

[timmygcsc2308]

* timmygcsc2308
* E2180.
* M0 stepping
* Batch num Q712A360
* Air Cooling
* P35 Chipset
* Asus P5K
* Umm..teh Beta one..07 something
* 325 stable FSB
* Bootable @ 330 FSB, failes Orthos
* 10x
* 3.25GHz stable speed
* 1:1 RAM ratio currently
* 3-3-3-12
* 2.1v RAM volts
* 1.56v
* Not sure on SB voltage
* CPU voltage 1.5v
* Idle Temp: 34 degrees both cores
* Load Temp: average 58 degrees
* Comments: Fails orthos @ 3.3GHz with 1.55vcore, not willing to push it higher

[linskingdom]

Originally Posted by timmygcsc2308

* timmygcsc2308
* E2180.
* M0 stepping
* Batch num Q712A360
* Air Cooling
* P35 Chipset
* Asus P5K
* Umm..teh Beta one..07 something
* 325 stable FSB
* Bootable @ 330 FSB, failes Orthos
* 10x
* 3.25GHz stable speed
* 1:1 RAM ratio currently
* 3-3-3-12
* 2.1v RAM volts
* 1.56v
* Not sure on SB voltage
* CPU voltage 1.5v
* Idle Temp: 34 degrees both cores
* Load Temp: average 58 degrees
* Comments: Fails orthos @ 3.3GHz with 1.55vcore, not willing to push it higher

Updated. Thanks for your information!

[Bear]

i've spoken with linskingdom and decided to add a vid column in the results... so for the people that have posted there results could you post your vid so that we can add it..thx

for people that dont know how to find it you can use coretemp or everest it will tell you or you can find it in your bios..

E2160 Q705A371 vid=1.325
E2160 Q702A762 vid=1.325
E2180 Q714A283 vid=1.212

[linskingdom]

Thanks Bear. I am adding this column in my database. Once I get all vid information, I will do a global update.

[gotzuqui07]

UserName. gotzuqui07
Batch #. Q713A326
Cooling. Scythe Ninja
Chipset. P35
Mobo. Gigabyte GA-P35-DS3L
BIOS. F5
FBS. 450
Max FSB. (not yet)
Multi. CPU multiplier. 8
CPSD. 3.6 GHZ
Ram SPD. Memory speed. 1.1 438mhz
Ram TM. Memory timing. 5-5-5-13
DDRV. DDR voltage. +0.2v
NBV. NorthBridge voltage. +0.2v
FSB voltage. +0.1v
CoreV. 1.53v in bios 1.48v in windows
Idle Temp: Idle temperature. 40/40
Load Temp: Load temperature. 57/57

There is my configuration, sorry for late

[linskingdom]

Originally Posted by gotzuqui07

UserName. gotzuqui07
Batch #. Q713A326
Cooling. Scythe Ninja
Chipset. P35
Mobo. Gigabyte GA-P35-DS3L
BIOS. F5
FBS. 450
Max FSB. (not yet)
Multi. CPU multiplier. 8
CPSD. 3.6 GHZ
Ram SPD. Memory speed. 1.1 438mhz
Ram TM. Memory timing. 5-5-5-13
DDRV. DDR voltage. +0.2v
NBV. NorthBridge voltage. +0.2v
FSB voltage. +0.1v
CoreV. 1.53v in bios 1.48v in windows
Idle Temp: Idle temperature. 40/40
Load Temp: Load temperature. 57/57

There is my configuration, sorry for late

Very nice! I will udpate it after work. Would you please include the vid wheny ou have a chance? You can get vid from the core temp program.

[Ben the OCer]

Good idea, here's my VID:

Ben the OCer
VID: 1.325v