The Stable E1000/E2000 Rigs Configuration Thread

[Dotard]

Originally Posted by justadude

I can't remember what I needed for 2.8 and 2.9, but for 3GHz it's 1.51875 BIOS, 1.488 idle actual on cpu-z, and 1.456 load. My cooler is so-so, it's a cooler master hyper tx2, which is a 3 heatpip tower config, with a 92mm fan on it. My temps at this vcore are 30 idle / 65 load with a ~22 ambient. I have a smidge more Vcore I could add to get a little higher o/c, but I think my temps would leave my comfort zone and I'd highly doubt stability anyway. Thanks for asking!

Linskingdom, pm replied, thanks!

~justadude

yikes sorry to hear your having a hard time.

[PizzaMan]

Here it is:

UserName. PizzaMan
CPU. Processor name - e2180
C/S. CPU Stepping.
Batch #. Q744A146
Cooling. CoolerMaster Hyper TX2
Chipset. 680i
Mobo. MSI P6N Diamond
BIOS. 1.3
FSB. 1400
M. FSB. 1000
Multi. 10
CPSD. 3500
Ram SPD. 500 7:10
Ram TM. 5-5-5-15-2T-30tRC
DDRV. Auto, showing 1.92v in speedfan
NBV. 1.45v in BOIS, showing 1.41v in speedfan
SBV. Auto, 1.5v
CoreV. 1.56v
VID. 1.3250v
Idle Temp: 22/23
Load Temp: 60/61
Comments: Boots fine at 3.6, but could not get it stable. Did post at 3.7 & 3.8, but would'nt boot.

3.5 was my goal.

I ran TAT while testing 3.6 @ 1.6V and it hit 85c in about two mins and shutdown comp. 85c is the Tj.Max in Core temp.

BTW, this is a newer model chip. I thought I had hit a wall at 3.1, but the 680i just has some FSBs that will not post. I droped to 3.4 and started posting again.

[linskingdom]

Good work. PizzaMan. Updated. Thanks.

[Retrospekt]

Lins, how did you manage to get 3.7?! Golden chip, or are all of them like this?

[linskingdom]

Originally Posted by Retrospekt

Lins, how did you manage to get 3.7?! Golden chip, or are all of them like this?

I have tried four of them. Three were between 3.2G and 3.4G. This one is pretty good. Those early batches are doing much better. I know Bear have two that are able to run at 3.7G.

[justadude]

Originally Posted by Dotard

yikes sorry to hear your having a hard time.

I'm not really having troubles per se, I've got a solid 50% overclock, stable at 3GHz. That's not the best around, but it is certainly nothing to scoff at. And my temps are alright for all that Vcore. The only hard time I'm having is figuring out if I just have to run that much Vcore for only 3GHz when many get it up to 3.2 or better on stock.

[PizzaMan]

I've plaayed with 3 e2180s and I've had to increase volts on all three before reaching 3.0

[japan1]

I'm back again with another e2160, my asrock board died on me so a got an similarly priced MSI board.

username: japan1
CPU: e2160
Stepping: m0
Batch: L746A256
Cooling: Air (ac7pro)
Chipset: 630i
Mobo: MSI P6NGM-FD
FSB: 333
MFSB: -
Multi: 9
CPSD: 3000
CPU/RAM: 5:6
Timings: 6-5-5-17
DDRV: 1.8
NBV: stock
SBV: stock
Corev: 1.36
VID-
Idle temp: 22
Load temp: 41
Comments: arctic pro 7, Ram:cpu unlinked, no vcore adjustment so no point going further,

[NrGx]

Could I please get mine updated? Thanks. Proof in sig.

[linskingdom]

Japan1 and FrGx. Updated. Thanks.