The Stable E1000/E2000 Rigs Configuration Thread

[PizzaMan]

e2220 for sale: http://www.newegg.com/Product/Produc...82E16819116070

http://www.intel.com/products/proces...core/specs.htm


Wonder if there will be any 4.0s in this batch.

[PGT96AJT]

Originally Posted by PizzaMan

e2220 for sale: http://www.newegg.com/Product/Produc...82E16819116070

http://www.intel.com/products/proces...core/specs.htm


Wonder if there will be any 4.0s in this batch.

Only need to get the FSB to 333.

[linskingdom]

Originally Posted by PizzaMan

e2220 for sale: http://www.newegg.com/Product/Produc...82E16819116070

http://www.intel.com/products/proces...core/specs.htm


Wonder if there will be any 4.0s in this batch.

I tried three. Only one went up to 3.75G and settled down at 3.45G. The another two were around 3.15G.

http://www.overclock.net/intel-build...00-budget.html

[b1gapl]

Could you guys please help me get a 100% OC with my E2140?

As of right now, my settings are:

Freq. - 3.1GHz (Around 93% OC)
FSB - 1550 (388)
RAM speed - Unlinked 800
Vcore - 1.425
Vcore Offset - Auto
NB - 1.563
RAM - 1.920

Any higher on the FSB and it won't boot. It doesn't boot with the Vcore set at 1.48125, which is the highest I tried on the Vcore.

I keep my RAM at 800, because the Corsair sticks I have, don't overclock well past their stock.

Any help is much appreciated.

[rsfkevski]

Bring your multiplier down on the CPU and increase FSB to accomidate. You'll need to bump your NB voltages up, but you should be able to reach 400FSB easily with that board.

[PizzaMan]

If the 650i board is anything like the 680i board you'll find that there are just FSBs that the board will not post or run stable. Might try just jumping to 3.3.

I thought I was stuck at 3.1Ghz also. After a week I had a friend tell me to jump. So I raised volts and tried 3.4Ghz. It worked!

Good luck.

[linskingdom]

Updated the list based on the information in your PM. Thanks.

[TunedFish]

* UserName. TunedFish
* CPU. Processor name - E1200
* C/S. CPU Stepping. D rev M0
* Batch #. Left it blank if you don’t have especially OEM version.
* Cooling. Tuniq Tower 120
* Chipset. P35
* Mobo. P35-DS3R
* BIOS. F11
* FSB. 438
* M. FSB.
* Multi. CPU multiplier. 8
* CPSD. 3504
* Ram SPD. 438. CPU : 1:1
* Ram TM. Memory timing. 4-4-4-12
* DDRV. DDR voltage. 2.2v
* NBV. NorthBridge voltage. 1.55v (max setting)
* SBV. SouthBridge voltage. ? (default)
* CoreV. CPU voltage. 1.59v (max bootable bios) 1.552v CPU-Z
* VID. 1.3000v
* Idle Temp: 32/Core 32
* Load Temp: Load temperature. 67/67
* Comments: I guess the next step is to vMod this thing

[david1977]

hi
i make another step in my overclock , so here are my settings
e2180 + asus p5e -x38 + a data 800+ extreme ed. 1g x2 dual channel + big typhoon 12cm/1300 rps + ati 2900xt 512mb
so here are the new settings
fsb 400 x 8 -thats 3200 mhz cpu and fsb 1600 mhz
msfb 400
ram speed 800 ,1:1 cl5, 2.0 ddr volts ( also cl4 4,4,4,12 + transaction disable 0 on 2,1volts.)
vcore at 1.312 /cpuz,everest -in bios i set vcore 1.35
ai twister strong
transaction booster enable - 0
loadcalibration enabled
anything else at auto...

temperatures in my setup at 22cels. ambient , cca 32 c. cpu/32 c. MB , on stress CPU after 10minutes has 50 cels./ 32 cels. -MB

now the system is really stable and everything runs really fast, and all the games i try at max. hiq. too, even crysis runs realy fast.

[PizzaMan]

Update me plz. I notice some of my past info is wrong and I have new info after lapping my CPU and heatsink.

3.5Ghz
Voltcore 1.55
Load temps 56c down from 61c
Also you still have me listed with stock heatsink. I'm running CoolerMaster Hyper TX2