|
|
|
09-05-08
|
#631 (permalink) | |||||||||
|
*cough* Stock *cough*
 
|
I have an update for my post. My batch # Q735A153.
__________________
 Fold for the cure. Fold for 37726.
|
|||||||||
|
|
|
09-05-08
|
#633 (permalink) | ||||||||||||
|
PC Gamer
|
please add me
Hi everybody, recently got my e2180 to 3.2 stable! Very happy with the performance compared to the 3.0 stable I had it at a month ago (when I first got it).
__________________ColdDeckEd E2180 C/S. CPU Stepping. Batch #. Cooling. Air Chipset. Intel P43 Mobo. ASRock P43Twins1600 BIOS. 1.7 FSB. 320 M. FSB. 350 Multi. CPU multiplier. 10x. CPSD. 3.2 ghz. Ram SPD. DDR2 800. CPU : 1:1 Ram TM. Memory timing. 4-5-5-13. DDR voltage. 2.2v NBV. auto SBV. auto CoreV. 1.552 VID. 1.3250. Idle Temp: Idle temperature. 28/28 Load Temp: Load temperature. 68/68 Comments: I know I'm pumping alot of voltage into her, and I wish I didn't have to, but I figure its a budget processor and its easy to replace. That being said I'm very pleased with the performance. I'd like to get 3.33 ghz, however I would have to add way too many volts to achieve 2 hrs OCCT stable. 
|
||||||||||||
|
|
|
|
09-05-08
|
#634 (permalink) | ||||||||||||
|
V'mod Squad VP
 
|
ColdDeckEd, if you upgrade your heatsink you should be able to get those temps under control and push a little further.
|
||||||||||||
|
|
|
09-07-08
|
#635 (permalink) | ||||
|
Performance
 
|
Quote:
__________________
Push to the limit one more time.. 
|
||||
|
|
|
09-30-08
|
#636 (permalink) | |||||||||||||
|
New to Overclock.net
|
* UserName : DJMD
__________________* CPU. Processor name : E2180. * C/S. CPU Stepping : D * Cooling : Air(Stock Fan) * Chipset : Intel P35 * Mobo : P35-DS3L * BIOS : F4 * FSB : 320 * Multi : CPU multiplier. 10 * CPSD : 3200 = 320*10 * Cpu Clock Ratio : 10X * Cpu Host Clock Control : Enable * Cpu Host Frequency : 320 * Performance Enhance : Standard * System Memory Multiplier : 2.50 * DRAM Timing Selectable : Manual * CAS Latency Time : 5 * DRAM RAS# to CAS# Delay : 5 * DRAM RAS# Precharge : 5 * Precharge delay (tRAS) : 18 * DDR2 over Voltage : +0.1 * FSB Over Voltage : +0.1 * CPU Voltage Control : 1.41 * Idle Temp: ~38 * Load Temp: ~65 * Comments: be happy 
|
|||||||||||||
|
|
|
|
09-30-08
|
#637 (permalink) | ||||||||||||
|
V'mod Squad VP
|
Nice OC for stock fan. Which Intel HS are you using? Is it the older one that is 1.25" tall or the newer 5/8th" tall? I was surprised at the last e2180 when it came with the tinyest HS I've seen in a long time.
|
||||||||||||
|
|
|
|
09-30-08
|
#638 (permalink) | ||||
|
Performance
|
Quote:
__________________
Push to the limit one more time..
|
||||
|
|
|
|
10-02-08
|
#639 (permalink) | |||||||||||||
|
Overclocker
 
|
Awsome Pizzaman !! Thats a great chip you have there.
I have been tinkering with the p45 and have now acheived 24/7 stable 3360 with 420 FSB x8! 1.46v 1680FSB !! same temps as 333 This is only possible on the 400 strap I have found for my setup
__________________
I am not down with the "standard". This man did not do what every other man did!  . 
|
|||||||||||||
|
|
|
|
10-13-08
|
#640 (permalink) |
|
New to Overclock.net
|
babeliak
E2180 M0 Q730A021 Air P35 Gigabyte P35-DS3 F6 300 340 10 3000 3:2 5-6-6-21 Auto (2.02) Auto (1.25) Auto (1.05) Auto (1.350) 1.300 38/38 70/70 AC Freezer 7 Pro, BIOS all "AUTO"  > 27 hours Prime95 stable (stopped it myself) Last edited by babeliak : 10-14-08 at 05:08 AM Reason: Batch No. |
|
|
|
