|
|
|
#61 (permalink) | |||
|
Performance
![]() |
That's pretty good for 365X9. Sicne you said it is similar to P5k, here is the quick run down. I don't have users manual with me so please check your bios. Pat attention your temp
1. Advance menu Jumperfree configuration ->AI overclocking -> Manual Jumperfree configuration ->Cpu ratio-> Manual 10 Jumperfree configuration ->FSB-> your number ????? Jumperfree configuration ->PCI-E -> 100 Jumperfree configuration ->Ram timing-> Fill the first four and let the rest to auto Jumperfree configuration ->Cpu speard spectrum-> Disabled Jumperfree configuration ->PCIE speard spectrum-> Disabled Jumperfree configuration ->Cpu voltage-> Start from stock. Jumperfree configuration ->Ram voltage-> Start from 1.8v. Check your ram. Jumperfree configuration ->FSB voltage-> start from 1.2v Jumperfree configuration -NB-> Start from small. Don't increse it unless it needs. Cpu configuration\ Cpu ratio -> 10 Cpu configuration\ c1E support ->Disabled Cpu configuration\ CPU tm ->Disabled Cpu configuration\ Intel speed stepping->disbaled
__________________
Push to the limit one more time.. ![]()
Last edited by linskingdom : 10-11-07 at 03:51 PM |
|||
|
|
|
|
#62 (permalink) | |||||||||||
|
New to Overclock.net
|
UserName. AxelL
__________________CPU. Processor name - E2180. C/S. CPU Stepping: D Revision: M0 (CPU-Z) Batch #. Q712A474 Cooling. WC Chipset. P35 Mobo. Gigabyte P35-DS3P rev1.0 BIOS. F6 FSB. 400 M. FSB. 400 Multi. 10 CPSD. 3200 Ram SPD. 4:5 Ram TM. 5-5-5-18 DDRV. 1.8V NBV. +0,15 SBV. CoreV. 1,536(CPU-Z); 1,57V BIOS VID. 1,312 Idle Temp: 36/35 Load Temp: 56/55 Comments: Got it 3,4Ghz but Vcore was too high 1,6+V to be "stable"
|
|||||||||||
|
|
|
|
|
#63 (permalink) | ||||
|
Performance
![]() |
Quote:
__________________
Push to the limit one more time.. ![]()
|
||||
|
|
|
|
#64 (permalink) | |||||||||||||
|
Overclocker
|
UserName. Brando_21
CPU. Processor name - E2160 C/S. L2 Batch #. SLA3H Cooling. WC Chipset. 965 Mobo. ABIT AB9 BIOS. 21 FSB. 370 M. FSB. 380 Multi. 9 CPSD. 3330 Ram SPD. 370 1:1 Ram TM. 4-4-4-11 DDRV. 2.0v NBV. 1.35 SBV. 1.25 CoreV. 1.375 VID. 1.325 Idle Temp: 42/39 Load Temp: Prime95(smallfft)66/65 Comments: had running at 380/9 but not stable -all settings except fsb and ram speed (1:1) remained the same, couldnt get stable even w/higher vcore edit: thanks for all the help linskingdom rep+
__________________
CPU-Z VALIDATED E7200@4215.62(443.75*9.5)MUGEN2 CPU-Z VALIDATED E7200@4.001@1.29v-24/7(mugen2) CPU-Z VALIDATED E2160@3.42 Daily OC(apogeeGT) CPU-Z VALIDATED E2160@3.68(apogeeGT) CPU-Z VALIDATED E4300@3.15 The miss' system ~ The Ford Owners Club ~
Last edited by Brando_21 : 10-11-07 at 10:14 PM |
|||||||||||||
|
|
|
|
|
#65 (permalink) | ||||
|
Performance
![]() |
Quote:
__________________
Push to the limit one more time.. ![]()
|
||||
|
|
|
|
#66 (permalink) | ||||||||||||
|
Intel Overclocker
![]() |
UserName. overcrash
CPU. Processor name - E2160 C/S. L2 Batch #. Q706A140 Cooling. Air Chipset. P35 Mobo. Gigabyte P35-DS3R BIOS. F6 FSB. 380 M. FSB. 400 Multi. 9 CPSD. 3420 Ram SPD. 1120 2:3 Ram TM. 4-4-4-12 DDRV. +0.6v FSBv +0.3v McHv +0.3v SBV. xxxx CoreV. 1.575 VID. 1.325 Idle Temp: 35/35 Load Temp: Orthos ( SmallFFT) 66/67 Comments: the chip has very good potential but it needs more voltage (1.6-1.7v) and better cooling for higher OC
Last edited by overcrash : 10-12-07 at 12:06 PM Reason: :) |
||||||||||||
|
|
|
|
|
#67 (permalink) | ||||
|
Performance
![]() |
Quote:
__________________
Push to the limit one more time.. ![]()
Last edited by linskingdom : 10-12-07 at 12:30 PM |
||||
|
|
|
|
#68 (permalink) | ||||||||||||
|
New to Overclock.net
|
UserName. doogiesooner
__________________CPU. Processor name - E2180 Batch #. Q712A468 Cooling. Air Chipset. P35 Mobo. Gigabyte P35-DS3L Rev. 1.0 BIOS. F5 FSB. 320 M. FSB. 400 Multi. 10 CPSD. 3200 Ram SPD. 800 4:5 Ram TM. 5-5-5-15 DDRV. +0.1V FSBv +0.1v McHv +0.1v CoreV. 1.392 VID. 1.325 Idle Temp: 32/32 Load Temp: 60/60 I haven't tried to push this too much. I've only had it a couple of days and I've been busy. I'm hoping to get it up a little more this weekend but I'm still satisfied for my first crack at Intel (used to be AMD guy).
|
||||||||||||
|
|
|
|
|
#69 (permalink) | ||||
|
Performance
![]() |
Quote:
__________________
Push to the limit one more time.. ![]()
|
||||
|
|
|
|
#70 (permalink) | ||||||||||||
|
New to Overclock.net
|
Been tring to oc my E2180. Give much props to linskingdom for the much needed help...
__________________
|
||||||||||||
|
|
|