The Stable E1000/E2000 Rigs Configuration Thread - Page 9 - Overclock.net

linskingdom · 10-13-07

Quote:

Originally Posted by rsfkevski

It's all good, I'm just frustrated with this board cause I can't set dividers to run my RAM at anywhere near it's rated speed. I've got to do alot more research on this board to see if there's anything I can do. I'm also thinking that I may have a couple of bad sticks of Ram as well due to it not being stable @ DDR2-533. Then again, it could also be that the E2180 needs more juice to get higher than 2.5GHZ, any comments on this are greatly appreciate. Just so you know, it's defaulting to 1.2V on Vcore!

I haven't tried this mobo so I am not the one should give you advice. Hope other members can provide some information for you.

cscheat · 10-14-07

UserName: cscheat
CPU: Processor name - E2160
C/S: need to check later
Batch #: need to check later
Cooling: Air
Chipset: nforce
Mobo: P5n-e SLI
BIOS: 0608
FSB: 356
M. FSB: 356
Multi: 9
CPSD: 3200
Ram SPD: 356 1:1
Ram TM: 4-4-4-12
DDRV: 2.1v
NBV: 1.39
CoreV: 1.42
Idle Temp: 39
Load Temp: 55
Comments: running on stock cooler!!

linskingdom · 10-14-07

Quote:

Originally Posted by cscheat

UserName: cscheat
CPU: Processor name - E2160
C/S: need to check later
Batch #: need to check later
Cooling: Air
Chipset: nforce
Mobo: P5n-e SLI
BIOS: 0608
FSB: 356
M. FSB: 356
Multi: 9
CPSD: 3200
Ram SPD: 356 1:1
Ram TM: 4-4-4-12
DDRV: 2.1v
NBV: 1.39
CoreV: 1.42
Idle Temp: 39
Load Temp: 55
Comments: running on stock cooler!!

cscheat, what can I say, cheers

almost 80% oc with stock and relatively low temp. Good work.

I update the list. I appreciate your efforts and I am sure other members will feel the same way.

david1977 · 10-14-07

hello i want to share my overclock, which is not the biggest maybe i try this later with new bios
UserName: david1977
CPU: Processor name - E2180
C/S: need to check later
Batch #: need to check later
Cooling: Air Big Typhoon 1500rpm
Chipset: x38
Mobo: Asus p5e
BIOS: 0107
FSB: 348
M. FSB: 348
Multi: 9
CPSD: 3140
Ram SPD: 348 1:1
Ram TM: 4-4-4-12
DDRV: 2.05v
NBV: auto
CoreV: 1.33 realtake 1.306
Idle Temp: 30
Load Temp: 37 / 43 / 58 on orthos
system Temp: 31 on idle / going to 40 on gaming, on cpu stress system temperature is at 33cels.
Comments: vcore drops on Load in steps
i try also vcore to give + - but i dont see any big difference only maybe in temp. little bit
bye
David

linskingdom · 10-14-07

Thank you so much for your configuration information.

This is a very exciting news because you are the first one to use x38 chipset board. I will update as soon as I get a chance.

My blackberry is suck.

linskingdom · 10-14-07

Updated as 10/14/2007 6:10 PM ET. We have first X38 chipetset mobo in the list. Thanks david1977 for sharing this information.

xfiddle · 10-14-07

Last night I reinstalled the TRU120X and today for the hell of it I decided to update my IP35-E bios to version 12 (not sure I want to try 13 yet).

I don't know if it was a better set on the heatsink or the new bios but I am really liking this chip so far.

I am currently at 3.1GHz (e2180@310x10) with a under load voltage of 1.15

All voltages are set to the lowest possible in bios except for dimm which is 2.1

temps are as follows.

idle: 29/29
load: 46/46

Going to keep going and then decide whether or not to lap my IHS and TRU120X

I originally started OC'ing this by upping all voltages to the theoretical max and watching temps but I'm thinking this wasn't the best option...

Just wondering when and what order everyone here starts to up the voltage on non-core voltage BIOS options?

linskingdom · 10-14-07

The 13 beta is fine. I used it for few weeks already. It really got rid of the double-boot problem but seems make the NB a bit hot. When it hits 3.4G and up, It will force you up the vcore but the CPU VVT and CPU GTLREF should be the last thing to adjust.

rsfkevski · 10-14-07

RsFKevSki
CPU. E2180
C/S. MO
Batch #. Q714A283
Cooling. Air
Chipset. VIA PT880 Pro/Ultra
Mobo. ASRock 4CoreDual-Sata2
BIOS. 1.6
FSB. 251
M. FSB. 267
Multi. 10
CPSD. 2.45GHZ
DDR2-800 @ DDR2-490 1:1
Timings-4.3.3.8
Ram Voltage-Unknown-Hypotheses is 1.9v
NB Voltage-Unknown-No adjustments
SB Voltage-Unknown-No adjustments
CoreV. 1.20v-No adjustments
VID. 1.20
Idle Temp: Idle temperature. 33ºC/33ºC
Load Temp: Load temperature. 38ºC/38ºC
Comments: Still attempting higher FSB/RAM clocks

linskingdom · 10-15-07

RsFKevSki, sorry for the delay. I finally got a chance to update your information. Other members and I very appreciate your efforts.

		Overclock.net - Overclocking.net > Intel > Intel CPUs
The Stable E1000/E2000 Rigs Configuration Thread

10-14-07	#84 (permalink)
david1977 New to Overclock.net Join Date: Oct 2007 Posts: 6 Rep: 1 Unique Rep: 1 Trader Rating: 0	hello i want to share my overclock, which is not the biggest maybe i try this later with new bios UserName: david1977 CPU: Processor name - E2180 C/S: need to check later Batch #: need to check later Cooling: Air Big Typhoon 1500rpm Chipset: x38 Mobo: Asus p5e BIOS: 0107 FSB: 348 M. FSB: 348 Multi: 9 CPSD: 3140 Ram SPD: 348 1:1 Ram TM: 4-4-4-12 DDRV: 2.05v NBV: auto CoreV: 1.33 realtake 1.306 Idle Temp: 30 Load Temp: 37 / 43 / 58 on orthos system Temp: 31 on idle / going to 40 on gaming, on cpu stress system temperature is at 33cels. Comments: vcore drops on Load in steps i try also vcore to give + - but i dont see any big difference only maybe in temp. little bit bye David

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)