P1MP1NJ

use the settings that got your to 16min but drop to 2t and your vcore is really high but all it will do is make excessive heat

__________________
P5N-E Bios Flash Utility

MrQ

leave your NB at auto and don't mess with any of the settings other than the FSB and memory speed. Thats what I do and it works every time.

__________________

P1MP1NJ

mine quite the contrary if you set anything to auto it wont post hurray P5n-E!

__________________
P5N-E Bios Flash Utility

PauluS

But when i leave everything at AUTO except the FSB and Memoryspeed, its not stable... When i run 3dmark its runs the first test and its "restarting" again

1st >> Im using FSB:1333 and RAM: 667 << THIS IS RIGHT OK??
2d >> Then ill need very much help with the voltages, because i really tryed much but cant get it stable with the volts.
3d >> Ram settings are at 4-4-4-12 2T now << IS THIS IS ALSO RIGHT??

P1MP1NJ

yes all that is right voltages you will just have to play with dont get to crazy tho i would say a max 2.3v for your ram 1.56 for NB and 1.4 for Vcore and again those are max

__________________
P5N-E Bios Flash Utility

PauluS

Uuuhm, i think its an other problem when i checked the temps of my NB an SB with my hands,

They are heat and i cant touch the SB to much, the NB is also warm/heat. Can this be the whole problem?? Some experts :P??

MrQ

The settings I run are what I told you and everything auto including my ram timings. Thats how I get it to post. Don't worry about voltages and timings until you are in windows. At these settings my system is rock solid stable.

__________________

PauluS

I will try this again like you sad. So let me clearup a few things, you have FSB 1333 and RAM 800 or 667? And everything else at AUTO?

MrQ

Ram set at 667 and everything else auto.

__________________

PauluS

Nopes, it dont helps I run only stable at >

FSB > 1200
RAM > 667
Timings > 4-4-4-12 2T
And then everything "AUTO"

This is the only setting that brings me a good perfect stable system!
3dmark06 score is: 13100