|
![]() |
Overclock.net - Overclocking.net > Intel > Intel CPUs | |
Intel 45nm Club
|
||
| View Poll Results: Which 780i MOBO would you recommend other 45nm users? | |||
| EVGA 132-CK-NF78-A1 |
|
25 | 45.45% |
| XFX MB-N780-ISH9 |
|
6 | 10.91% |
| ASUS P5N-T Deluxe |
|
1 | 1.82% |
| MSI P7N Diamond |
|
4 | 7.27% |
| ASUS Striker II Formula |
|
12 | 21.82% |
| Other |
|
13 | 23.64% |
| Multiple Choice Poll. Voters: 55. You may not vote on this poll | |||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#11 (permalink) | ||||||||||||
|
New to Overclock.net
|
q9450 from tankguys ordered yesterday, it will be here tomorrow as well as rest of system parts from newegg, needless to say WOOOOOO
__________________
|
||||||||||||
|
|
|
|
|
#12 (permalink) | ||||||||||||
|
WaterCooler
![]() |
yes...I think stock was 1.21 or something low like that, when I get he I can post a cpuz screenshot if my net is working at home
__________________
|
||||||||||||
|
|
|
|
|
#13 (permalink) | |||||||||||||
|
Professional GTA 4 Modder
![]() |
E8400
3.6ghz @ 1.23 4.0ghz @ 1.37 4.45ghz @ 1.51 my 680i has problems at that.
__________________
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE DUCT TAPE. I heard Ford is coming out with heated bumpers in 2010 so your hands don not get cold while pushing it.
|
|||||||||||||
|
|
|
|
#14 (permalink) | |||||||||||||
|
4.0 GHz
![]() |
My E8400 Batch # Q745A567
4.0Ghz 24/7 - 1.26v / 1.24v on load. I haven't tried anything much more, i can do 4.3ghz @ 1.367v..
|
|||||||||||||
|
|
|
|
|
#15 (permalink) | |||||||||||||
|
PC Gamer
|
Quote:
Sorry if this is a stupid question, but are those voltages what you are entering in the bios, or what is measured in Windows (with CPU-z or something else)? Just trying to figure out why I can't get anything over 3.8 to be stable on my 780i.
|
|||||||||||||
|
|
|
|
|
#16 (permalink) | |||||||||||||
|
4.0 GHz
![]() |
QX9650@ 4.0GHz 1.34 Vcore.
__________________
"Build a man a fire, he'll be warm for a night. Set a man on fire, he'll be warm for the rest of his life." ![]() 22,294 3DMark 06 (SLI 8800GTs) Quote:
|
|||||||||||||
|
|
|
|
|
#17 (permalink) | |||||||||||
|
Overclocker in Training
|
I'm new to OCing. Will take it slow at first. Eventually, I'll have the fortitude to get it past 4.0. Member list Updated.
|
|||||||||||
|
|
|
|
|
#18 (permalink) | |||||||||||||
|
New to Overclock.net
![]()
Join Date: Sep 2006
Location: caldwell, Idaho
Posts: 3,387
Rep: 166
![]() ![]() Unique Rep: 125
Trader Rating: 2
|
x3350 at 3.6ghz running 1.3v
__________________
|
|||||||||||||
|
|
|
|
|
#19 (permalink) | ||||||||||||
|
New to Overclock.net
![]() |
E8400, Q745 batch, currently running 24/7 at stock undervolted as in my sig, OC is stable at 3.15 Ghz@1.15v in BIOS (1.12 after board droop).
Coretemp may be confused, it says my VID is 1.1125v, which I'm pretty sure isn't stock, but rather what I've used to boot the system all along at stock Mhz. Seems low. Someone needs to explain VID on these chips to me. I've seen everything from 1.1125-1.225. By the way, coretemp is definitely confused on my idle temps, these chips do not idle 25 C above CPU temp, no way, nohow.
__________________
"The internet is text for people who can't read." -Andrew Eldritch
|
||||||||||||
|
|
|
|
|
#20 (permalink) | |||||||||||
|
Overclocker in Training
|
Member list updated.
|
|||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|